Le test Extreme Networks EW0-200 est l'un très improtant dans tous les tests de Certification Extreme Networks, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.
Votre vie changera beaucoup après d'obtenir le Certificat de Extreme Networks EW0-200. Tout va améliorer, la vie, le boulot, etc. Après tout, Extreme Networks EW0-200 est un test très important dans la série de test Certification Extreme Networks. Mais c'est pas facile à réussir le test Extreme Networks EW0-200.
Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test Extreme Networks EW0-200, la voie à la réussite de votre professionnel sera ouverte pour vous.
Code d'Examen: EW0-200
Nom d'Examen: Extreme Networks (Extreme networks associate(ena))
Questions et réponses: 240 Q&As
Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Extreme Networks EW0-200, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.
Pass4Test est un seul site web qui peut offrir toutes les documentations de test Extreme Networks EW0-200. Ce ne sera pas un problème à réussir le test Extreme Networks EW0-200 si vous préparez le test avec notre guide d'étude.
EW0-200 Démo gratuit à télécharger: http://www.pass4test.fr/EW0-200.html
NO.1 The CLI console port utilizes a serial cable for physical switch to terminal connection.
A. TRUE
B. FALSE
Answer:A
Extreme Networks EW0-200 EW0-200 examen EW0-200 EW0-200 examen
NO.2 Which CLI command would you use to configure the switch to ignore STP for selected VLANs?
A. enable ignore-stp vlan <stpd>
B. enable ignore-bpdu stpd <stpd> vlan <vlan>
C. enable ignore-bpdu stpd <stpd>
D. enable ignore-stp vlan <vlan>
Answer: D
Extreme Networks examen EW0-200 EW0-200 EW0-200
NO.3 Which statement is true? In a PC, the configured default gateway:
A. Is always within the PC IP (sub) network.
B. Is always outside the PC IP (sub) network.
C. Is always behind a router.
D. Can be anywhere.
Answer:A
Extreme Networks examen EW0-200 certification EW0-200 certification EW0-200 EW0-200 examen certification EW0-200
NO.4 How would you stop a scheduled configuration download from happening? Use the CLI command:
A. cancel configuration download
B. download configuration cancel
C. configuration download cancel
D. delete configuration download
Answer: B
Extreme Networks EW0-200 EW0-200 examen certification EW0-200 EW0-200 EW0-200
NO.5 Which of the following protocol filter/s is/are predefined in ExtremeWare?
A. OSPF
B. TCP
C. NETBIOS
D. All of these
Answer: C
Extreme Networks examen EW0-200 EW0-200 examen EW0-200
NO.6 A 802.1Q tag is a marker inserted between the source and destination MAC addresses fields of the
Ethernet frame.
A. TRUE
B. FALSE
Answer: B
Extreme Networks examen EW0-200 certification EW0-200
NO.7 An Extreme Switch is shipped with a pre-configured VLAN called DEFAULT that has all switch ports as
tagged members.
A. TRUE
B. FALSE
Answer: B
Extreme Networks examen EW0-200 EW0-200 certification EW0-200 EW0-200 examen
NO.8 What CLI command is used to disable learning of incoming RIP routes on an interface?
A. disable rip learning <VLAN>
B. configure rip rxmode none <VLAN>
C. configure rip interface <VLAN> passive
D. None of these
Answer: B
Extreme Networks examen certification EW0-200 EW0-200 examen certification EW0-200
NO.9 Which step would you take to configure a VLAN to only allow IP-related traffic?
A. config <vlan> protocol ip
B. config protocol <vlan> ip
C. config ip protocol <vlan>
D. None of these.
Answer:A
Extreme Networks examen EW0-200 certification EW0-200 certification EW0-200 EW0-200
NO.10 This type of OSPF router has its router interfaces connected into multiple OSPF areas.
A. ASBR.
B. ABR.
C. DR.
D. BDR.
Answer: B
Extreme Networks certification EW0-200 certification EW0-200 certification EW0-200
NO.11 In spanning tree, the designated bridge is the bridge with the:
A. least-cost path to the root bridge
B. highest bridge priority
C. lowest port cost on all ports
D. None of these
Answer:A
certification Extreme Networks EW0-200 certification EW0-200 EW0-200 examen
NO.12 If you wish to silently drop all traffic destined for IP network 100.219.10.0/24 with a gateway of
10.219.10.1/24 and without receiving any ICMP messages that would otherwise be generated, which CLI
command would you execute?
A. configure iproute delete 100.219.10.0/24 gateway 10.219.10.1
B. configure iproute default 100.219.10.0/24
C. configure iproute add blackhole 100.219.10.0/24 gateway 10.219.10.1
D. configure iproute add blackhole 100.219.10.0/24
Answer: D
certification Extreme Networks EW0-200 EW0-200 EW0-200 EW0-200 EW0-200
NO.13 Which CLI command will you use to change the CLI prompt from the default display to Switch02?
A. CONFIG SNMP SYSLOCATION Switch02
B. CONFIG SNMP SYSNAME Switch02
C. CONFIG CLI PROMPT Switch02
D. CONFIG CLI DISPLAY Switch02
Answer: B
Extreme Networks examen EW0-200 EW0-200 EW0-200 EW0-200
NO.14 Which of the following CLI commands would you use to enable ECMP for RIP?
A. enable rip route sharing
B. enable route sharing rip
C. enable iproute sharing
D. None of these, ecmp is not supported by RIP
Answer: D
Extreme Networks examen EW0-200 certification EW0-200
NO.15 Extreme Networks switches build their forwarding database from the incoming packet field information
containing the:
A. Source MAC address.
B. Destination MAC address.
C. Source IP address.
D. Destination IP address.
Answer:A
certification Extreme Networks EW0-200 EW0-200
NO.16 In ExtremeWare, active VLANs that are configured with ports and an IP address and configured to
forward IP and run a routing protocol will have their subnet advertised.
A. TRUE
B. FALSE
Answer:A
certification Extreme Networks certification EW0-200 certification EW0-200
NO.17 Given the following information, select the option that would allow you to change the active
ExtremeWare version to 6.1.9b11 upon reboot.
A. use image primary
B. download config primary
C. use config primary
D. download image primary
Answer:A
Extreme Networks EW0-200 certification EW0-200
NO.18 The default administrator login name for a new Extreme switch was entered as ADMIN (all caps). This
will allow the administrator access to the CLI.
A. TRUE
B. FALSE
Answer: B
Extreme Networks EW0-200 EW0-200 certification EW0-200 EW0-200
NO.19 ExtremeWare, pre-installed on every Extreme Networks ?chipset switch, combines industry standard
protocols to ensure interoperability with legacy switches and routers, QoS for bandwidth management
and traffic prioritization in today networks.
A. TRUE
B. FALSE
Answer:A
Extreme Networks examen EW0-200 EW0-200 examen EW0-200
NO.20 Which CLI command would you use to create a default route with a metric of 5 and a gateway of
10.0.0.1?
A. CONFIG IPROUTE ADD DEFAULT 10.0.0.1 5
B. CONFIG IPROUTE ADD DEFAULT 5 10.0.0.1
C. CREATE IPROUTE ADD DEFAULT 10.0.0.1 5
D. CREATE IPROUTE ADD DEFAULT 5 10.0.0.1
Answer:A
Extreme Networks EW0-200 examen certification EW0-200 EW0-200 examen certification EW0-200
Le test Extreme Networks EW0-200 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.
没有评论:
发表评论