Le test Symantec ST0-12W est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Symantec ST0-12W rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Symantec ST0-12W.
Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A Symantec ST0-12W comme votre guide d'étude.
Code d'Examen: ST0-12W
Nom d'Examen: Symantec (Veritas Cluster Server 5 for Windows (STS))
Questions et réponses: 100 Q&As
Beaucoup de gens trouvent difficile à passer le test Symantec ST0-12W, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Symantec ST0-12W n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
Si vous faites toujours la lutte contre le test Symantec ST0-12W, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Symantec ST0-12W. Si vous avez déjà décidé à s'améliorer via Symantec ST0-12W, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.
Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.
ST0-12W Démo gratuit à télécharger: http://www.pass4test.fr/ST0-12W.html
NO.1 You want to validate operation after installing, configuring, and starting Veritas Cluster Server. Which
two GAB ports should be shown as running? (Choose two.)
A. a
B. c
C. h
D. S
E. V
Answer:A,C
Symantec examen ST0-12W ST0-12W ST0-12W
NO.2 You are modifying the cluster configuration while the cluster is stopped. You have edited and verified
the main.cf file on system SysA. Which command do you use to start the cluster with the new
configuration on system SysA?
A. hastart
B. haclus -rebuild .Imain .cr
C. hasys ?start SysA
D. hareconfig
Answer:A
Symantec ST0-12W examen ST0-12W ST0-12W
NO.3 What is the Veritas Cluster Server term for how a system joining an existing cluster retrieves the cluster
configuration?
A. remote build
B. local build
C. onetime build
D. initial build
Answer:A
Symantec ST0-12W certification ST0-12W ST0-12W
NO.4 Which Symantec product feature or attribute allows for the same application to be started
simultaneously on different systems?
A. parallet service groups
B. Veritas FlashSnap
C. the online local dependency
D. the parallelstart group attribute
Answer:A
certification Symantec ST0-12W examen certification ST0-12W ST0-12W
NO.5 You are tasked with making an existing production system highly available with Veritas Cluster Server.
You have already verified that the hardware is compatible with Veritas Cluster Server. You are now
evaluating the software on the systems for Veritas Cluster Server compatibility.
What must be verified for Veritas Cluster Server compatibility?
A. the oper~ting system version
B. the volume management software version
C. the NIC driver version
D. the file system version
Answer:A
Symantec certification ST0-12W ST0-12W ST0-12W examen
NO.6 Which characteristic must an application have in order to be managed by Veritas Cluster Server?
A. It must be re startable to ~ known state after failure and tattover.
B. It must be startable by a user other than the system account.
C. It must be a stateless application.
D. It must be capable of running on all systems simultaneously.
Answer:A
Symantec examen ST0-12W ST0-12W examen ST0-12W examen certification ST0-12W
NO.7 You have two of three systems in a cluster up and running Veritas Cluster Server. When the third
system starts, it finds that it has a valid Veritas Cluster Server configuration file. This configuration is
different than the one on the first two systems.
How does Veritas Cluster Server handle this situation?
A. It will use the configur~tion from the first two systems.
B. It will use the configuration from the third system.
C. It will integrate the files to resolve the differences.
D. The third node will be unable to start.
Answer:A
Symantec ST0-12W certification ST0-12W
NO.8 You have one of three systems in a cluster up and running Veritas Cluster Server. When the second
system starts, it finds that it has a valid Veritas Cluster Server configuration file. This configuration is
different than the one on the first system.
What happens?
A. Verltas Cluster Server uses the one from the first system.
B. Veritas Cluster Server uses the one from the second system.
C. Veritas Cluster Server will integrate the files.
D. Veritas Cluster Server will wait for the third system.
Answer:A
Symantec examen ST0-12W ST0-12W examen ST0-12W examen
NO.9 Which two tasks can be performed to improve the overall fault tolerance of a Veritas Cluster Server
cluster? (Choose two.)
A. connect e ach system in the cluster to separate power sources DB. mirror the os disk of e ach system
in the cluster
C. connect a tape drive to each system in the cluster
D. add a local disk array to each system in the cluster
E. add CPUs to each node in the cluster
Answer:A,B
Symantec ST0-12W ST0-12W
NO.10 What is the Veritas Cluster Server service that maintains resource configuration and state
information?
A. h~d
B. hastate
C. haconf
D.hacf
Answer: A
Symantec ST0-12W ST0-12W examen certification ST0-12W ST0-12W examen ST0-12W
NO.11 You are designing a high availability solution for an important new application and you are in the
process of identifying single points of failure in the design. What are two possible single points of failure
that can be addressed by Veritas Cluster Server? (Choose two.)
A. network
B. stor~ge
C. processors
D. memory
E. environment
Answer:A,B
certification Symantec ST0-12W examen ST0-12W ST0-12W examen
NO.12 Four servers available for clustering are located in two buildings. Each building contains two servers
and the servers are on the same network. There are two disk arrays to which all four servers have shared
data access. Which type of cluster topology is required?
A. campus cluster
B. global cluster
C. shared nothing cluster
D. split brain cluster
Answer:A
certification Symantec certification ST0-12W ST0-12W certification ST0-12W ST0-12W examen ST0-12W
NO.13 What are two valid settings for the ManageFaults service group attibute? (Choose two.) A . All
B. None
C.Priority
D. MonitorOnly
E. Manual
Answer: A,B,
Symantec certification ST0-12W ST0-12W examen ST0-12W ST0-12W examen
NO.14 Which three elements must be moved from the failed server to the takeover server for network users to
resume access to the database when a failover occurs? (Choose three.)
A. the vtrtuat ts address
B. the set of processes
C. the Ethernet address
D. the public key
E. the disk group
Answer:A,B,E
Symantec ST0-12W examen certification ST0-12W ST0-12W
NO.15 Several application service groups require their own virtuallP addresses to share a single NIC on each
system in a cluster. Which agent reduces the overhead associated with monitoring the NIC’ s
status?
A. proxy
B. MultiNICB
C. NIC
D. phantom
Answer: A
Symantec examen certification ST0-12W ST0-12W certification ST0-12W ST0-12W
NO.16 A process is manually shut down to test an automatic failover of a configured Process resource. The
service group then fails over to another system. What should be cleared before bringing the service group
back to the system on which the test was originally conducted?
A. resource
B. attribute
C. cluster
D. system
Answer:A
Symantec ST0-12W ST0-12W
NO.17 Where are configuration changes maintained in a running Veritas Cluster Server cluster?
A. memory on ~II systems
B. disk on all systems
C. memory on quorum system
D. disk on quorum system
Answer:A
Symantec certification ST0-12W ST0-12W examen
NO.18 A service group with the FaiioverPolicy set to Priority has a fault and is failing over. The group fail over
to the system with the __ .
A. lowest as siqne d value in the groups SystemList
B. highest assigned value in the groups SystemList
C. lowest number of service groups currently online
D. highest available capacity in the groups SystemList
Answer:A
Symantec ST0-12W certification ST0-12W
NO.19 Which command do you use to change a service group attribute in a running cluster?
A. h~grp ?modify
B. hagrp ?change
C. hamodify ?group
D. hamodify ?attribute
Answer:A
Symantec certification ST0-12W ST0-12W ST0-12W ST0-12W
NO.20 What are three possible types of Veritas Cluster Server service groups? (Choose three.)
A. Failover
B. Hybrid
C. Parallel
D. Singlenode
E. OnOnly
Answer: A,B,C
Symantec ST0-12W examen certification ST0-12W ST0-12W
Choisissez le Pass4Test, choisissez le succès de test Symantec ST0-12W. Bonne chance à vous.
没有评论:
发表评论