Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test IBM 000-562. Ajoutez la Q&A au panier.
Participer au test IBM 000-562 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat IBM 000-562 symbole bien la professionnalité d'un travailleur dans cette industrie.
Code d'Examen: 000-562
Nom d'Examen: IBM (IBM Tivoli Storage Productivity Center V4.2 Implementation)
Questions et réponses: 200 Q&As
Le test IBM 000-562 est l'un très improtant dans tous les tests de Certification IBM, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.
Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.
Si vous vous inscriez le test IBM 000-562, vous devez choisir une bonne Q&A. Le test IBM 000-562 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.
Choisissez le Pass4Test, choisissez le succès de test IBM 000-562. Bonne chance à vous.
000-562 Démo gratuit à télécharger: http://www.pass4test.fr/000-562.html
NO.1 Which task must be completed to fine tune and control which files are scanned during a filesystem scan
and specify exactly which statistical information is gathered?
A. create a custom scan
B. create a custom probe
C. create a custom profile
D. create a custom Storage Resource Agent Group
Answer: C
IBM 000-562 certification 000-562
NO.2 Given a malfunctioning IBM Tivoli Storage Productivity Center V4.2 (TPC) installation at a customer
site after a network topology reconfiguration, what is the full path to check the TPC configuration files?
A. c:\Program Files\IBM
B. c:\Program Files\IBM\TPC
C. c:\Program Files\IBM\TPC\config
D. c:\Program Files\IBM\TPC\server\config
Answer: C
IBM 000-562 examen certification 000-562 000-562
NO.3 Where can a list of all the devices discovered by IBM Tivoli Storage Productivity Center V4.2 be
viewed?
A. Reporting > System Reporting
B. System Reports > Disk > SAN Assets (All)
C. System Reports > Fabric > SAN Assets (All)
D. Data Manager > Reporting > Asset Reporting
Answer: C
IBM 000-562 examen 000-562 examen 000-562
NO.4 What is the full default path for finding log files that give information about the success or failure of the
IBM Tivoli Storage Productivity Center V4.2 (TPC) installation on a 32-bit Windows server.?
A. C:\Program Files\TPC\log
B. C:\Program Files\IBM\data\log
C. C:\Program Files\IBM\TPC\log
D. C:\Program Files\IBM\device\log
Answer: C
certification IBM 000-562 000-562 examen
NO.5 What must be done before IBM Tivoli Storage Productivity Center V4.2 (TPC) manages network
attached storage (NAS)?
A. enable SNMP on the NAS filer
B. enable the Storage Resource Agent on the NAS filer
C. mount a file system of the NAS filer to the agent server
D. configure the CIMOM server to be on a trusted domain of the NAS filer
Answer: A
IBM certification 000-562 certification 000-562 000-562 000-562
NO.6 In preparing for migration of all IBM Tivoli Storage Productivity Center (TPC) components to the newest
level, the implementing person installed an IBM Tivoli Storage Manager (TSM) Backup/Archive client on
the TPC Server and configured it to run standard file backups of the local filesystems. What is the best
practice backup method for TPC?
A. online backup using TSM API for Databases to save TPC configuration
B. online backup using the built-in TPC Backup Utility which uses the API to send data to a TSM server
C. offline backup of TPC to TSM without pausing any servers to archive the current state of the TPC
Server
D. offline backup of TPC to TSM with stopping the data, the device servers, and the DB2 database prior to
copying the files
Answer: D
certification IBM certification 000-562 000-562
NO.7 When attempting to log in to the IBM Tivoli Storage Productivity Center V4.2 (TPC) Graphical User
Interface (GUI) the user gets an access denied message. What is causing this error?
A. The TPC GUI service is down.
B. The user does not have a valid operating system login ID.
C. The user does not have Administrative Authority on the server.
D. The user has not been added to a mapped role or group within TPC.
Answer: D
IBM 000-562 examen certification 000-562
NO.8 The History Aggregator is enabled by default to run every day at 3:00 a.m. Which two historical data
statistics can be used for trend analysis? (Choose two.)
A. disk removal statistics
B. disk capacity statistics
C. file modification statistics
D. file backup time statistics
E. file type space usage statistics
Answer: B,E
IBM 000-562 000-562 000-562 examen 000-562
NO.9 Which command must be run for IBM DB2 before IBM Tivoli Storage Productivity Center V4.2 is
installed in a UNIX environment?
A. ./usr/db2inst1/sqllib/db2profile
B. . /opt/db2inst1/sqllib/db2profile
C. . /home/db2inst1/sqllib/db2profile
D. . /home/sqllib/db2profile/db2inst1
Answer: C
IBM 000-562 examen 000-562 examen certification 000-562
NO.10 Profiles enable which two capabilities when used in a scan? (Choose two.)
A. ability to gather statistics
B. ability to control which files are scanned
C. ability to control which hosts are scanned
D. ability to control which fabrics are scanned
E. ability to control which disk storage subsystems are scanned
Answer: A,B
certification IBM certification 000-562 certification 000-562 000-562 000-562
NO.11 A customer uses the Configure Wizard device to configure new or existing resources so that data is
collected on the configured group. Which resource can be configured with the wizard?
A. In-band Fabric Agent
B. SAN Volume Controller
C. Storage Resource Agent
D. VMWare VI Data Source
Answer: B
IBM 000-562 examen 000-562 000-562 certification 000-562 000-562 examen
NO.12 A customer wants to manage devices in the same manner (storage, fabric, server, or tapes). Which
panel would be displayed in the Configure Device Wizard?
A. Select CIMOM
B. Select Devices
C. Select Device Preference
D. Select Storage Subsystem
Answer: B
IBM 000-562 000-562 000-562 examen 000-562
NO.13 In provisioning a new storage subsystem, an administrator inadvertently violated a zoning-related
policy. If the zoning-related configuration changes persist in the database, which IBM Tivoli Storage
Productivity Center V4.2 analytics function can be used to detect this policy violation?
A. Storage Optimizer
B. Analytics Validation
C. SAN Policy Manager
D. Configuration Analysis
Answer: D
IBM certification 000-562 000-562 examen 000-562
NO.14 Which two areas can configure history retention in order to perform historical analysis and reporting?
(Choose two.)
A. Scan
B. Probe
C. Computers
D. Filesystems
E. Performance Monitors
Answer: D,E
certification IBM 000-562 examen 000-562 000-562 000-562
NO.15 IBM Tivoli Storage Productivity Center V4.2 (TPC) Server audit logging initiated by the Graphical User
Interface writes to the log file at which location?
A. TPC_installation_directory\IBM\TPC\data\log\AuditTrace.log
B. TPC_installation_directory\IBM\TPC\device\log\AuditTrace.log
C. TPC_installation_directory\IBM\TPC\data\log\auditTPCDataServer.log
D. TPC_installation_directory\IBM\TPC\device\log\auditTPCDeviceServer.log
Answer: A
IBM examen 000-562 000-562 000-562 000-562 examen
NO.16 When including profiles in a scan the desired profiles can be highlighted in the Available Profiles list box
and applied to which two selectable sections? (Choose two.)
A. Files
B. Hosts
C. Directories
D. Filesystems
E. Operating System Types
Answer: C,D
IBM certification 000-562 000-562 examen 000-562 000-562
NO.17 A client wants to migrate 100 data and fabric agents into Storage Resource Agents (SRA). In addition to
command line and installation wizard, what other method can be used for the migration?
A. Administrative Services > Configuration > SRA Upgrades
B. Administrative Services > Configuration > SRA Deployments
C. Administrative Services > Configuration > Migrate Data/Fabric Agent
D. Administrative Services > Data Sources > Data/SRA > Migrate Data/Fabric Agent
Answer: C
certification IBM certification 000-562 000-562 certification 000-562
NO.18 IBM Tivoli Storage Productivity Center V4.2 (TPC) is managing DS8000, DS6000, DS5000, DS4000,
DS3000, Element Management Clients, NetApp, Hitachi Data Systems, XIV storage subsystems, and
SAN Volume Controllers. A discovery job is scheduled to run every 6 hours and a probe job is scheduled
to run every 12 hours. Recently the probe job is the only one that has errors. What could be the problem?
A. The probe job failed on CIMOM devices.
B. The probe job is taking more than 12 hours.
C. The discovery job taking more than 6 hours.
D. The probe job is schedule to run indefinitely.
Answer: B
IBM 000-562 examen 000-562 examen 000-562 certification 000-562 000-562
NO.19 A customer has IBM Tivoli Storage Productivity Center V4.1 (TPC) installed on Windows 2003 with 8GB
of RAM running IBM DB2 V9.5 Fixpack 5 with 10 Data Agents and 5 Fabric Agents. The customer wants
to utilize the Configure Device Wizard on the newest TPC V4.2 code. Which solution will retain their
current configuration and minimize additional setup time?
A. fresh install of DB2
B. upgrade to TPC V4.2
C. upgrade to TPC V4.2 and migrate Data and Fabric Agents
D. fresh install of TPC V4.2 and deploy Storage Resource Agents
Answer: C
IBM examen certification 000-562 000-562 examen
NO.20 How can the storage subsystem's performance be viewed?
A. Data Manager > Reporting > Storage Subsystem Performance
B. Disk Manager > Reporting > Storage Subsystems > Volume to HBA Assignment
C. Topology > Storage, click Topology Settings and add Performance on the Active Overlay settings
D. Topology > Fabrics, click Topology Settings and add Expand All Sections on the Active Overlay
settings
Answer: C
IBM examen 000-562 000-562
Avec la version plus nouvelle de Q&A IBM 000-562, réussir le test IBM 000-562 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.
没有评论:
发表评论