Pass4Test est un catalyseur de votre succès de test CheckPoint 156-215-75. En visant la Certification de CheckPoint, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test CheckPoint 156-215-75, la Q&A CheckPoint 156-215-75 est un bon choix pour vous.
L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification CheckPoint 156-215-75. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification CheckPoint 156-215-75.
Finalement, la Q&A CheckPoint 156-215-75 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test CheckPoint 156-215-75 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification CheckPoint, vous aurez un meilleur salaire et une plus grande space à se développer.
Code d'Examen: 156-215-75
Nom d'Examen: CheckPoint (Check Point Certified Security Administrator)
Questions et réponses: 531 Q&As
Si vous traviallez dur encore pour préparer le test de CheckPoint 156-215-75 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test CheckPoint 156-215-75.
Vous pouvez tout d'abord télécharger le démo CheckPoint 156-215-75 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.
Bien qu'il ne soit pas facile à réussir le test CheckPoint 156-215-75, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test CheckPoint 156-215-75, mais encore à vous aider d'économiser votre temps.
156-215-75 Démo gratuit à télécharger: http://www.pass4test.fr/156-215-75.html
NO.1 You are a security architect and need to design a secure firewall, VPN and IPS
solution. Where would
be the best place to install IPS in the topology if the internal network is already protected?
A. On the firewall itself to protect all connected networks centrally.
B. On each network segment separately.
C. On the LAN is enough, the DMZ does not need to be protected.
D. In front of the firewall is enough.
Answer: A
CheckPoint 156-215-75 156-215-75 156-215-75 examen
NO.2 Which of the following statements is TRUE about management plug-ins?
A. The plug-in is a package installed on the Security Gateway.
B. A management plug-in interacts with a Security Management Server to provide new
features and
support for new products.
C. Using a plug-in offers full central management only if special licensing is applied to
specific features of
the plug-in.
D. Installing a management plug-in is just like an upgrade process. (It overwrites existing
components.)
Answer: B
CheckPoint examen 156-215-75 certification 156-215-75
NO.3 When doing a Stand-Alone Installation, you would install the Security Management
Server with which
other Check Point architecture component?
A. SecureClient
B. Security Gateway
C. SmartConsole
D. None, Security Management Server would be installed by itself
Answer: B
certification CheckPoint certification 156-215-75 156-215-75 156-215-75 examen certification 156-215-75
NO.4 Which of the following statements about Bridge mode is TRUE.?
A. When managing a Security Gateway in Bridge mode, it is possible to use a bridge
interface for Network
Address Translation.
B. Assuming a new installation, bridge mode requires changing the existing IP routing of the
network.
C. All ClusterXL modes are supported.
D. A bridge must be configured with a pair of interfaces.
Answer: D
CheckPoint 156-215-75 examen certification 156-215-75 156-215-75 examen
NO.5 UDP packets are delivered if they are _________.
A. A legal response to an allowed request on the inverse UDP ports and IP
B. A Stateful ACK to a valid SYN-SYN-/ACK on the inverse UDP ports and IP
C. Reference in the SAM related Dynamic tables
D. Bypassing the Kernel by the forwarding layer
of clusterXL
Answer: A
CheckPoint certification 156-215-75 156-215-75 156-215-75 examen
NO.6 Which SmartConsole component can Administrators use to track remote administrative
activities?
A. WebUI
B. Eventia Reporter
C. SmartView Monitor
D. SmartView Tracker
Answer: D
certification CheckPoint certification 156-215-75 156-215-75 certification 156-215-75
NO.7 When Jon first installed the system, he forgot to configure DNS servers on his
Security Gateway.
How could Jon configure DNS servers now that his Security Gateway is in production?
A. Login to the firewall using SSH and run cpconfig, then select Domain Name Servers.
B. Login to the firewall using SSH and run fwm, then select System Configuration and
Domain Name
Servers.
C. Login to the SmartDashboard, edit the firewall Gateway object, select the tab Interfaces,
then Domain
Name Servers.
D. Login to the firewall using SSH and run sysconfig, then select Domain Name Servers.
Answer: D
CheckPoint examen 156-215-75 examen 156-215-75 156-215-75
NO.8 R75's INSPECT Engine inserts itself into the kernel between which two layers of the
OSI model?
A. Presentation and Application
B. Physical and Data
C. Session and Transport
D. Data and Network
Answer: D
CheckPoint 156-215-75 examen 156-215-75 156-215-75 156-215-75
NO.9 You are running the Security Gateway on SecurePlatform and configure SNX with
default settings. The
client fails to connect to the Security Gateway. What is wrong?
A. The routing table on the client does not get modified.
B. The client has Active-X blocked.
C. The client is configured incorrectly.
D. The SecurePlatform Web User Interface is listening on port 443.
Answer: D
CheckPoint examen certification 156-215-75 certification 156-215-75 156-215-75 156-215-75
NO.10 Of the three mechanisms Check Point uses for controlling traffic, which enables
firewalls to incorporate
layer 4 awareness in packet inspection?
A. IPS
B. Packet filtering
C. Stateful Inspection
D. Application Intelligence
Answer: C
CheckPoint 156-215-75 156-215-75 certification 156-215-75
NO.11 How can you recreate the account of the Security Administrator, which was created
during initial
installation of the Management Server on SecurePlatform?
A. Launch cpconfig and delete the Administrator's account. Recreate the account with the
same name.
B. Export the user database into an ASCII file with fwm dbexport. Open this file with an
editor, and delete
the Administrator Account portion of the file. You will be prompted to create a new account.
C. Type cpm -a, and provide the existing Administrator's account name. Reset the Security
Administrator's password.
D. Launch SmartDashboard in the User Management screen, and delete the cpconfig
administrator.
Answer: A
certification CheckPoint 156-215-75 examen 156-215-75 examen
NO.12 The customer has a small Check Point installation, which includes one Linux
Enterprise 3.0 server
working as the SmartConsole, and a second server running Windows 2003 as both Security
Management
Server running Windows 2003 as both Security Management Server and Security Gateway.
This is an
example of a(n).
A. Stand-Alone Installation
B. Distributed Installation
C. Hybrid Installation
D. Unsupported configuration
Answer: D
CheckPoint 156-215-75 156-215-75
NO.13 During which step in the installation process is it necessary to note the fingerprint for
first-time
verification?
A. When establishing SIC between the Security Management Server and the Gateway
B. When configuring the Security Management Server using cpconfig
C. When configuring the Security Gateway object in SmartDashboard
D. When configuring the Gateway in the WebUl
Answer: B
CheckPoint certification 156-215-75 156-215-75 examen
NO.14 How can you most quickly reset Secure Internal Communications (SIC) between a
Security
Management Server and Security Gateway?
A. Run the command fwm sic-reset to initialize the Internal Certificate Authority (ICA) of the
Security
Management Server. Then retype the activation key on the Security Gateway from
SmartDashboard.
B. Use SmartDashboard to retype the activation key on the Security Gateway. This will
automatically
Sync SIC to both the Security Management Server and Gateway.
C. From cpconfig on the Gateway, choose the Secure Internal Communication option and
retype the
activation key. Next, retype the same key in the Gateway object in SmartDashboard and
reinitialize
Secure Internal Communications (SIC).
D. From the Security Management Server s command line, Type fw putkey p <shared key> <
IP Address
of security Gateway>.
Answer: C
CheckPoint 156-215-75 156-215-75
NO.15 The customer has a small Check Point installation which includes one Windows 2003
server as
SmartConsole and Security Management Server with a second server running
SecurePlatform as
Security Gateway. This is an example of a(n):
A. Hybrid Installation.
B. Unsupported configuration.
C. Distributed Installation.
D. Stand-Alone Installation.
Answer: C
certification CheckPoint 156-215-75 certification 156-215-75 156-215-75
NO.16 The customer has a small Check Point installation which includes one Windows XP
workstation as the
SmartConsole, one Solaris server working as Security Management Server, and a third
server running
SecurePlatform as Security Gateway. This is an example of a(n):
A. Stand-Alone Installation.
B. Unsupported configuration
C. Distributed Installation.
D. Hybrid Installation.
Answer: C
CheckPoint examen 156-215-75 examen 156-215-75
NO.17 The Check Point Security Gateway's virtual machine (kernel) exists between which two
layers of the
OSI model?
A. Session and Network layers
B. Application and Presentation layers
C. Physical and Datalink layers
D. Network and Datalink layers
Answer: D
CheckPoint certification 156-215-75 certification 156-215-75
NO.18 The customer has a small Check Point installation which includes one Windows 2003
server as the
SmartConsole and a second server running SecurePlatform as both Security Management
Server and
the Security Gateway. This is an example of a(n):
A. Unsupported configuration.
B. Hybrid Installation.
C. Distributed Installation.
D. Stand-Alone Installation.
Answer: D
CheckPoint 156-215-75 examen 156-215-75 156-215-75
NO.19 You are installing a Security Management Server. Your security plan calls for three
administrators for
this particular server. How many can you create during installation?
A. Depends on the license installed on the Security Management Server
B. Only one with full access and one with read-only access
C. One
D. As many as you want
Answer: C
certification CheckPoint 156-215-75 certification 156-215-75 certification 156-215-75
NO.20 Once installed, the R75 kernel resides directly below which layer of the OSI model?
Note: Application
is the top and Physical is the bottom of the IP stack.
A. Network
B. Transport
C. Data Link
D. Session
Answer: A
CheckPoint examen 156-215-75 examen certification 156-215-75 156-215-75 examen
Vous CheckPoint 156-215-75 pouvez télécharger le démo CheckPoint 156-215-75 gratuit dans le site Pass4Test pour essayer notre qualité. Une fois vous achetez le produit de Pass4Test, nous allons faire tous effort à vous aider à réussir le test à la première fois et vous laisser savoir qu'il ne faut pas beaucoup de travaux pour réussir ce que vous voulez.
没有评论:
发表评论