2014年1月28日星期二

Pass4Test offre une formation sur CheckPoint 156-215-75 matériaux examen

Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.

Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test CheckPoint 156-215-75 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.

Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.

Code d'Examen: 156-215-75
Nom d'Examen: CheckPoint (Check Point Certified Security Administrator)
Questions et réponses: 531 Q&As

Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test CheckPoint 156-215-75, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.

Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de CheckPoint 156-215-75 très tôt. Pass4Test peut vous permettre à réussir 100% le test CheckPoint 156-215-75, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.

L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification CheckPoint 156-215-75. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification CheckPoint 156-215-75.

Le Certificat de CheckPoint 156-215-75 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat CheckPoint 156-215-75, c'est-à-dire avoir une grande fortune. Le Certificat CheckPoint 156-215-75 peut bien tester des connaissances professionnelles IT. La Q&A CheckPoint 156-215-75 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.

156-215-75 Démo gratuit à télécharger: http://www.pass4test.fr/156-215-75.html

NO.1 The customer has a small Check Point installation which includes one Windows XP
workstation as the
SmartConsole, one Solaris server working as Security Management Server, and a third
server running
SecurePlatform as Security Gateway. This is an example of a(n):
A. Stand-Alone Installation.
B. Unsupported configuration
C. Distributed Installation.
D. Hybrid Installation.
Answer: C

certification CheckPoint   certification 156-215-75   certification 156-215-75   156-215-75

NO.2 Which SmartConsole component can Administrators use to track remote administrative
activities?
A. WebUI
B. Eventia Reporter
C. SmartView Monitor
D. SmartView Tracker
Answer: D

CheckPoint examen   156-215-75   156-215-75   156-215-75   certification 156-215-75

NO.3 Which of the following statements about Bridge mode is TRUE.?
A. When managing a Security Gateway in Bridge mode, it is possible to use a bridge
interface for Network
Address Translation.
B. Assuming a new installation, bridge mode requires changing the existing IP routing of the
network.
C. All ClusterXL modes are supported.
D. A bridge must be configured with a pair of interfaces.
Answer: D

certification CheckPoint   certification 156-215-75   156-215-75 examen

NO.4 The customer has a small Check Point installation which includes one Windows 2003
server as the
SmartConsole and a second server running SecurePlatform as both Security Management
Server and
the Security Gateway. This is an example of a(n):
A. Unsupported configuration.
B. Hybrid Installation.
C. Distributed Installation.
D. Stand-Alone Installation.
Answer: D

CheckPoint   156-215-75   156-215-75   156-215-75

NO.5 The Check Point Security Gateway's virtual machine (kernel) exists between which two
layers of the
OSI model?
A. Session and Network layers
B. Application and Presentation layers
C. Physical and Datalink layers
D. Network and Datalink layers
Answer: D

CheckPoint   156-215-75 examen   156-215-75

NO.6 Of the three mechanisms Check Point uses for controlling traffic, which enables
firewalls to incorporate
layer 4 awareness in packet inspection?
A. IPS
B. Packet filtering
C. Stateful Inspection
D. Application Intelligence
Answer: C

certification CheckPoint   156-215-75 examen   156-215-75   156-215-75 examen

NO.7 When Jon first installed the system, he forgot to configure DNS servers on his
Security Gateway.
How could Jon configure DNS servers now that his Security Gateway is in production?
A. Login to the firewall using SSH and run cpconfig, then select Domain Name Servers.
B. Login to the firewall using SSH and run fwm, then select System Configuration and
Domain Name
Servers.
C. Login to the SmartDashboard, edit the firewall Gateway object, select the tab Interfaces,
then Domain
Name Servers.
D. Login to the firewall using SSH and run sysconfig, then select Domain Name Servers.
Answer: D

CheckPoint   certification 156-215-75   156-215-75   156-215-75 examen   certification 156-215-75

NO.8 R75's INSPECT Engine inserts itself into the kernel between which two layers of the
OSI model?
A. Presentation and Application
B. Physical and Data
C. Session and Transport
D. Data and Network
Answer: D

CheckPoint examen   certification 156-215-75   156-215-75 examen   certification 156-215-75   156-215-75

NO.9 How can you most quickly reset Secure Internal Communications (SIC) between a
Security
Management Server and Security Gateway?
A. Run the command fwm sic-reset to initialize the Internal Certificate Authority (ICA) of the
Security
Management Server. Then retype the activation key on the Security Gateway from
SmartDashboard.
B. Use SmartDashboard to retype the activation key on the Security Gateway. This will
automatically
Sync SIC to both the Security Management Server and Gateway.
C. From cpconfig on the Gateway, choose the Secure Internal Communication option and
retype the
activation key. Next, retype the same key in the Gateway object in SmartDashboard and
reinitialize
Secure Internal Communications (SIC).
D. From the Security Management Server s command line, Type fw putkey p <shared key> <
IP Address
of security Gateway>.
Answer: C

CheckPoint   156-215-75   156-215-75   certification 156-215-75   156-215-75 examen

NO.10 Once installed, the R75 kernel resides directly below which layer of the OSI model?
Note: Application
is the top and Physical is the bottom of the IP stack.
A. Network
B. Transport
C. Data Link
D. Session
Answer: A

CheckPoint examen   156-215-75   156-215-75   156-215-75

NO.11 How can you recreate the account of the Security Administrator, which was created
during initial
installation of the Management Server on SecurePlatform?
A. Launch cpconfig and delete the Administrator's account. Recreate the account with the
same name.
B. Export the user database into an ASCII file with fwm dbexport. Open this file with an
editor, and delete
the Administrator Account portion of the file. You will be prompted to create a new account.
C. Type cpm -a, and provide the existing Administrator's account name. Reset the Security
Administrator's password.
D. Launch SmartDashboard in the User Management screen, and delete the cpconfig
administrator.
Answer: A

CheckPoint examen   156-215-75   156-215-75

NO.12 You are installing a Security Management Server. Your security plan calls for three
administrators for
this particular server. How many can you create during installation?
A. Depends on the license installed on the Security Management Server
B. Only one with full access and one with read-only access
C. One
D. As many as you want
Answer: C

CheckPoint examen   156-215-75 examen   156-215-75   156-215-75 examen   156-215-75

NO.13 The customer has a small Check Point installation which includes one Windows 2003
server as
SmartConsole and Security Management Server with a second server running
SecurePlatform as
Security Gateway. This is an example of a(n):
A. Hybrid Installation.
B. Unsupported configuration.
C. Distributed Installation.
D. Stand-Alone Installation.
Answer: C

CheckPoint examen   156-215-75   certification 156-215-75   156-215-75

NO.14 During which step in the installation process is it necessary to note the fingerprint for
first-time
verification?
A. When establishing SIC between the Security Management Server and the Gateway
B. When configuring the Security Management Server using cpconfig
C. When configuring the Security Gateway object in SmartDashboard
D. When configuring the Gateway in the WebUl
Answer: B

CheckPoint examen   156-215-75   certification 156-215-75   156-215-75   156-215-75 examen

NO.15 You are a security architect and need to design a secure firewall, VPN and IPS
solution. Where would
be the best place to install IPS in the topology if the internal network is already protected?
A. On the firewall itself to protect all connected networks centrally.
B. On each network segment separately.
C. On the LAN is enough, the DMZ does not need to be protected.
D. In front of the firewall is enough.
Answer: A

CheckPoint   156-215-75   156-215-75   156-215-75   156-215-75

NO.16 Which of the following statements is TRUE about management plug-ins?
A. The plug-in is a package installed on the Security Gateway.
B. A management plug-in interacts with a Security Management Server to provide new
features and
support for new products.
C. Using a plug-in offers full central management only if special licensing is applied to
specific features of
the plug-in.
D. Installing a management plug-in is just like an upgrade process. (It overwrites existing
components.)
Answer: B

CheckPoint   156-215-75 examen   156-215-75

NO.17 The customer has a small Check Point installation, which includes one Linux
Enterprise 3.0 server
working as the SmartConsole, and a second server running Windows 2003 as both Security
Management
Server running Windows 2003 as both Security Management Server and Security Gateway.
This is an
example of a(n).
A. Stand-Alone Installation
B. Distributed Installation
C. Hybrid Installation
D. Unsupported configuration
Answer: D

CheckPoint   156-215-75   156-215-75 examen   156-215-75   certification 156-215-75

NO.18 When doing a Stand-Alone Installation, you would install the Security Management
Server with which
other Check Point architecture component?
A. SecureClient
B. Security Gateway
C. SmartConsole
D. None, Security Management Server would be installed by itself
Answer: B

CheckPoint   certification 156-215-75   certification 156-215-75   certification 156-215-75   certification 156-215-75

NO.19 UDP packets are delivered if they are _________.
A. A legal response to an allowed request on the inverse UDP ports and IP
B. A Stateful ACK to a valid SYN-SYN-/ACK on the inverse UDP ports and IP
C. Reference in the SAM related Dynamic tables
D. Bypassing the Kernel by the forwarding layer
of clusterXL
Answer: A

CheckPoint examen   156-215-75   156-215-75   156-215-75 examen

NO.20 You are running the Security Gateway on SecurePlatform and configure SNX with
default settings. The
client fails to connect to the Security Gateway. What is wrong?
A. The routing table on the client does not get modified.
B. The client has Active-X blocked.
C. The client is configured incorrectly.
D. The SecurePlatform Web User Interface is listening on port 443.
Answer: D

CheckPoint examen   156-215-75   156-215-75 examen   156-215-75 examen

Pass4Test peut vous fournir un raccourci à passer le test CheckPoint 156-215-75: moins de temps et efforts dépensés. Vous trouverez les bonnes documentations de se former dans le site Pass4Test qui peut vous aider efficacement à réussir le test CheckPoint 156-215-75. Si vous voyez les documentations dans les autres sites, c'est pas difficile à trouver qu''elles sont venues de Pass4Test, parce que lesquelles dans Pass4Test sont le plus complété et la mise à jour plus vite.

没有评论:

发表评论