2013年10月31日星期四

Pass4Test offre de HP HP0-S17 matériaux d'essai

Si vous voulez ne se soucier plus à passer le test HP HP0-S17, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test HP HP0-S17. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A HP HP0-S17 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.

C'est pas facile à passer le test Certification HP HP0-S17, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test HP HP0-S17 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test HP HP0-S17, vous allez passer le test HP HP0-S17 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.

Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.

Pour vous laisser savoir mieux que la Q&A HP HP0-S17 produit par Pass4Test est persuadante, le démo de Q&A HP HP0-S17 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test HP HP0-S17 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.

Passer le test HP HP0-S17, obtenir le Passport peut améliorer la perspective de votre carrière et vous apporter plus de chances à développer votre boulot. Pass4Test est un site très convenable pour les candidats de test Certification HP HP0-S17. Ce site peut offrir les informations plus nouvelles et aussi provider les bonnes chances à se former davantage. Ce sont les points essentiels pour votre succès de test Certification HP HP0-S17.

Code d'Examen: HP0-S17
Nom d'Examen: HP (Integrating and Managing HP BladeSystem in the Enterprise)
Questions et réponses: 130 Q&As

HP0-S17 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-S17.html

NO.1 Which interconnect module offered by HP has the capability of assigning a configuration profile to a
specific server blade?
A.GbE2c Switch
B.Cisco 3020 Switch
C.Virtual Connect Ethernet
D.Ethernet Pass-Thru Module
ANSWER: C

HP   HP0-S17   HP0-S17   HP0-S17 examen

NO.2 You are administrating several c-Class enclosures and are looking for a unified authentication system
for all iLO cards and Onboard Administrator modules.
What is the proper solution?
A.HP Protect Tools
B.Credential Manager
C.Virtual Connect Enterprise Manager
D.Lightweight Directory Access Protocol (LDAP)
ANSWER: D

certification HP   HP0-S17   certification HP0-S17   HP0-S17 examen   certification HP0-S17

NO.3 Which features does Virtual Connect Ethernet module (VC-Enet) provide in a network environment?
(Select two.)
A.VC-Enet can stack across four enclosures in a rack.
B.VC-Enet appears as an HP ProCurve device to other network devices.
C.VC-Enet will not add any new switches for the network administrator to manage.
D.VC-Enet domains can be created directly using the Onboard Administrator console.
ANSWER: AC

HP   HP0-S17 examen   HP0-S17 examen   HP0-S17   certification HP0-S17

NO.4 What is an advantage of a c7000 Enclosure compared to a c3000 Enclosure in an enterprise
environment?
A.N+N redundancy in the power subsystem
B.Virtual Connect and storage blade support
C.interconnect redundancy for integrated NICs
D.application of Onboard Administrator advanced license
ANSWER: C

HP   HP0-S17   HP0-S17 examen

NO.5 A customer that usually works with a c3000 Enclosure needs to use the external DVD drive on a
c7000 Enclosure and connect the drive to all servers in the c7000 Enclosure.
How can the external DVD drive on the c7000 Enclosure be accessed?
A.Use the DVD drive integrated in the c7000 Enclosure.
B.Use the DVD drive connected to the downlink port of the c7000 Enclosure.
C.Use the DVD drive connected to the USB port on an Onboard Administrator module.
D.Use the DVD drive attached through the serial/USB/video cable attached to any server blade.
ANSWER: C

HP   HP0-S17   HP0-S17

NO.6 Which interconnect option creates domains and stacks LAN modules across c7000 Enclosures?
A.GbE2c Ethernet
B.Virtual Connect Ethernet
C.Ethernet Pass-Thru Module
D.Virtual Connect Fibre Channel
ANSWER: B

HP   HP0-S17 examen   HP0-S17

NO.7 Which management suite delivers core management functionality for the HP BladeSystem solution,
including server deployment, health monitoring, performance monitoring, vulnerability scanning and patch
management?
A.HP Storage Essentials
B.HP Operations Software
C.Insight Control Environment
D.HP Systems Insight Manager
ANSWER: C

HP   HP0-S17 examen   HP0-S17   certification HP0-S17

NO.8 Which ProLiant Essentials Value Pack is an integrated power monitoring and management
application that provides centralized monitoring and control of datacenter power consumption and thermal
output?
A.Insight Power Manager
B.HP Rack and Power Manager
C.Performance Management Pack
D.Vulnerability and Patch Management Pack
ANSWER: A

HP   certification HP0-S17   HP0-S17

NO.9 Which devices can be assigned an IP address through Enclosure Bay IP Addressing (EBIPA) for
c-Class server blades? (Select two.)
A.iLO 2 cards
B.interconnects
C.Insight Display
D.LAN interfaces of mezzanine cards
E.iSCSI target IP address on server blades
ANSWER: AB

certification HP   HP0-S17   HP0-S17   certification HP0-S17   HP0-S17

NO.10 What is the purpose of the HP StorageWorks SB40c Storage Blade?
A.provides a blade form factor tape solution for any server supporting the TCP/IP protocol
B.provides a blade form factor networked shared storage for any server supporting IP-based storage
(iSCSI)
C.provides additional storage capabilities dedicated to a single server blade within the same c7000
Enclosure
D.provides additional storage capabilities dedicated to a single server blade in another linked c7000
Enclosure
ANSWER: C

HP   HP0-S17   certification HP0-S17   HP0-S17 examen

NO.11 Which industry standard technologies are compatible with the SB600c AiO Storage Blade? (Select
two.)
A.ATA
B.SAS
C.SCSI
D.iSCSI
E.SATA
ANSWER: BD

HP   HP0-S17   HP0-S17   HP0-S17 examen   HP0-S17 examen

NO.12 A customer is looking for a virtualization solution for their data center. Their main area of concern is
server down time.
You have identified the x86-based virtualization candidates. Which platform best suits the customer's
needs?
A.scale-up
B.scale-out
C.Integrity VSE
D.single server virtual consolidation
ANSWER: B

HP examen   HP0-S17   HP0-S17   HP0-S17   HP0-S17

NO.13 A BladeSystem enclosure is managed by one Onboard Administrator that failed. Which functionality is
still available? (Select two.)
A.iLO 2 is accessible.
B.All fans are up and running.
C.Server blades can access the SAN.
D.New server blades can be added and powered up.
E.New interconnect devices can be added and powered up.
ANSWER: BC

HP   HP0-S17 examen   certification HP0-S17

NO.14 Your customer has a c7000 Enclosure and two power supplies installed in bays 1 and 2. They are
switching from single-phase power to a three-phase power subsystem with full redundancy.
Which action is necessary to make this configuration work and be supported?
A.Install 4 additional power supplies.
B.Move the power supplies to bays 1 and 4.
C.Turn off the Dynamic Power Saver feature.
D.Enable three-phase power using the Onboard Administrator.
ANSWER: A

HP   HP0-S17   HP0-S17   HP0-S17

NO.15 Which industry standard protocols are used by HP SIM? (Select two.)
A.XML
B.TFTP
C.iSCSI
D.WBEM
E.NetBEUI
ANSWER: AD

certification HP   HP0-S17 examen   HP0-S17 examen

NO.16 Which industry standard memory technology can be used by Intel Xeon-based c-Class server blades
to provide additional protection against failed or degrading FB-DIMMs? (Select two.)
A.Advanced ECC
B.mirrored memory
C.registered DIMMs
D.online spare memory
E.interleaved memory support
ANSWER: BD

HP examen   HP0-S17 examen   certification HP0-S17   HP0-S17   certification HP0-S17

NO.17 An administrator needs to monitor performance of every drive connected to the Smart Array controller.
Each drive is configured as a single logical drive.
Which tool can be used?
A.Insight Diagnostic
B.Radia Performance Manager
C.Performance Management Pack
D.Windows Server Performance Monitor
ANSWER: C

HP examen   HP0-S17 examen   certification HP0-S17

NO.18 A customer has a Virtual Connect managed enclosure and needs to move one of the blades to a
non-virtual connect enclosure.
What should be done so that duplicate MAC addresses and WWNs do not appear in the datacenter due
to server blade deployment?
A.Enable the Reset to factory default switch on the blade system board.
B.Run the erase utility on the blade before plugging the server to the network.
C.First delete all MAC and WWNs configurations while the server is in the VC managed enclosure and
then move the server to the non-VC managed enclosure.
D.MAC addresses and WWNs are automatically returned to factory defaults when the server is moved to
the non-Virtual connect enclosure so no duplicate MAC addresses or WWNs appear.
ANSWER: D

HP   certification HP0-S17   HP0-S17   certification HP0-S17   HP0-S17

NO.19 Which industry standard processor options are supported in the HP BL460c Server Blade? (Select two.)
A.Dual-Core Intel Xeon
B.Quad-Core Intel Xeon
C.Dual-Core Intel Itanium2
D.Dual-Core AMD Opteron
E.Quad-Core AMD Opteron
ANSWER: AB

HP   HP0-S17   HP0-S17

NO.20 You are replacing one of your redundant GbE2c interconnect switch modules in your c7000 Enclosure.
What must you be aware of when you install a replacement GbE2C switch with default settings into the
enclosure?
A.Crosslink ports are disabled and redundancy is lost between switches.
B.Crosslink ports are enabled and will cause a loop in your switch topology.
C.Uplink ports are disabled and must be enabled manually in the switch manager.
D.Downlink ports are disabled and must be enabled manually in the switch manager.
ANSWER: A

certification HP   HP0-S17   HP0-S17 examen   certification HP0-S17   HP0-S17

NO.21 An administrator configures an HP c7000 Enclosure using Onboard Administrator. Which option can
be used to automatically configure IP addresses for all iLO cards and interconnect modules?
A.Insight Display
B.Virtual Connect Manager
C.Interconnect LAN Manager
D.Enclosure Bay IP Addressing (EBIPA)
ANSWER: D

HP examen   HP0-S17   certification HP0-S17   HP0-S17 examen

NO.22 Your customer wants to replace an existing c3000 Enclosure with a c7000 Enclosure. Which
components from the c3000 Enclosure can be reused in the c7000 Enclosure? (Select three.)
A.fans
B.power supplies
C.interconnect modules
D.server and storage blades
E.Onboard Administrator module
ANSWER: ACD

certification HP   HP0-S17   HP0-S17 examen   HP0-S17 examen

NO.23 Which service features are included in the Enhanced Network Installation and Startup Service for
BladeSystem Switches? (Select two.)
A.service planning interview
B.network device configuration
C.comprehensive porting and migration
D.systematic analysis of configurations for software patch version inconsistencies
E.proactive and rapid-response services to protect strategic operations against downtime risks
ANSWER: AB

certification HP   certification HP0-S17   HP0-S17   certification HP0-S17   certification HP0-S17

NO.24 Which industry standard memory technologies are supported in a BL465c Server Blade? (Select two.)
A.memory sparing
B.memory mirroring
C.memory interleaving
D.ECC and Advanced ECC
E.833MHz maximum speed DIMMs
ANSWER: CD

HP   HP0-S17   certification HP0-S17

NO.25 The Virtual Connect Fibre Channel module uses which type of Port ID Virtualization protocol to
aggregate multiple Fibre Channel HBAs over a smaller number of physical uplinks?
A.E_Port
B.F_Port
C.L_Port
D.N_Port
ANSWER: D

HP   certification HP0-S17   HP0-S17   HP0-S17   HP0-S17

NO.26 A customer wants to deploy a c7000 Enclosure and six server blades in a datacenter with limited
power. How can they ensure the solution fits within the available datacenter power envelope?
A.The customer needs to make sure they have at least 6750 watts of available power in every case.
B.Use the HP BladeSystem Sizer to determine how much power is needed for the configuration they want
to deploy.
C.Use the HP Rack and Power tool to determine how much power is needed for the configuration they
want to deploy.
D.Use the Enterprise Configurator in ActiveAnswers to determine how much power is needed for the
configuration they want to deploy.
ANSWER: B

HP   HP0-S17   certification HP0-S17

NO.27 Which tool tests and evaluates the hardware and software configuration of systems where HP SIM is
installed or is being considered for installation?
A.Insight Control Advisor
B.HP SIM Capacity Planner
C.Active Answers Solution Sizer
D.Site Installation Preparation Utility
ANSWER: A

HP examen   certification HP0-S17   HP0-S17   HP0-S17   HP0-S17

NO.28 Your customer is looking for an Ethernet interconnect with Fibre uplinks for their c7000 Enclosure.
Which interconnects should be considered? (Select two.)
A.GbE2c Switch
B.Infiniband switch
C.Cisco Catalyst 3020
D.GbE2c Layer 2/3 Switch
E.Ethernet Pass-Thru Module
ANSWER: CD

HP examen   HP0-S17   certification HP0-S17   HP0-S17 examen   HP0-S17

NO.29 After replacing a failed drive in a server blade, your customer complains about long logical drive time
recovery. What can you do to reduce recovery time?
A.Migrate the logical drive to RAID 6.
B.Install MPIO software on the server blade.
C.Set the rebuild priority to high on the controller.
D.Enable the Tagged Command Queuing (TCQ) feature on the hard drive.
ANSWER: C

HP   HP0-S17   HP0-S17 examen

NO.30 Which service features are included in the Enhanced Network Installation and Startup Service for
BladeSystem Switches? (Select two.)
A.verification of operation
B.confirmation of software revisions
C.comprehensive porting and migration
D.systematic analysis of configurations for software patch version inconsistencies
E.proactive and rapid-response services to protect strategic operations against downtime risks
ANSWER: AB

HP   HP0-S17 examen   HP0-S17   HP0-S17 examen

Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test HP HP0-S17. Votre argent sera tout rendu si vous échouez le test.

没有评论:

发表评论