Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Cisco 351-050, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Cisco 351-050 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Cisco 351-050 sans aucune doute.
Le Certificat de Cisco 351-050 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification Cisco 351-050, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test 351-050 sans aucun éffort, en même temps, le test de Cisco 351-050 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test Cisco 351-050 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.
La Q&A Cisco 351-050 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification Cisco 351-050.
Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Cisco 351-050 dans Pass4Test pour se former avant le test Cisco 351-050.
Code d'Examen: 351-050
Nom d'Examen: Cisco (CCIE Wireless Beta Written Exam)
Questions et réponses: 240 Q&As
Bien qu'il ne soit pas facile à réussir le test Cisco 351-050, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test Cisco 351-050, mais encore à vous aider d'économiser votre temps.
351-050 Démo gratuit à télécharger: http://www.pass4test.fr/351-050.html
NO.1 Which description concerning wireless voice traffic is correct?
A. Voice traffic is more latency-sensitive.
B. Wireless voice traffic must be on a dedicated channel apart from wireless data.
C. Wireless voice devices cannot share APs with wireless data NIC cards.
D. 1Mb/s and 2Mb/s data rates are required for the phones, but not for the wireless data traffic.
Answer: A
Cisco 351-050 351-050 351-050 examen 351-050 examen 351-050
NO.2 Which three options are true when an H-REAP AP is in the "authentication down/local switching" state
for a given WLAN? (Choose three.)
A. New WebAuth sessions are permitted.
B. The AP continues to send beacon probes and responses to keep current clients connected.
C. 802.11 roaming events incur a full 802.1X re-authentication.
D. Any new clients trying to authenticate are rejected.
Answer: B,C,D
Cisco examen 351-050 certification 351-050 351-050 351-050 examen
NO.3 You are a network technician . According to the following exhibit, a client configured for LEAP
authentication, a RADIUS server configured for LEAP, and an autonomous AP configured as displayed. If
authentication fails for the client, which is the most likely cause of this problem?
A. The client supplicant: This client is providing the wrong EAP-ID in its EAP Identity response.
B. The RADIUS server timeout: This timeout is too short; the access point will wait for theRADIUS server,
then the timer will expire and authentication will fail.
C. The RADIUS server at 192.168.1.22: There is either a RADIUS key mismatch or usercredentials are
not matching on the RADIUS Server.
D. The AP: The AP is misconfigured, because the authentication is set to use the local databaseon the
AP.
Answer: D
Cisco 351-050 351-050
NO.4 How to describe the radiation pattern of patch and Yagi antennas when viewed from the side (Hplane)?
A. The patch patterns are egg-shaped, the Yagi patterns are conical
B. The patch patterns are doughnut-shaped, the Yagi patterns are conical
C. The patch patterns are conical, the Yagi patterns are doughnut-shaped
D. The patch patterns are conical, the Yagi patterns are egg-shaped
Answer: A
Cisco 351-050 certification 351-050 351-050 examen
NO.5 How do the characteristics that are available on the Cisco WCS for Linux version differ from those of
the Cisco WCS for Windows version?
A. Cisco WCS for Linux is required for deployments.
B. Assuming that there are no differences in hardware, a Cisco WCS for Linux can support up to750
wireless LAN controllers. A Cisco WCS for Windows can support up to 250 wireless LANcontrollers.
C. Cisco WCS for Windows includes support for Cisco Spectrum Expert clients. Cisco WCS forLinux does
not support Cisco Spectrum Expert clients.
D. There are no differences in features between the Linux and Windows versions of Cisco WCS.
Answer: D
Cisco 351-050 examen 351-050
NO.6 The following message can be seen on a Cisco WCS:
AP 'floor-1-lobby', interface '802.11b/g' on Controller '10.1.1.1'. Noise threshold violated.
There is also a correlation between the occurrence of the message and user complaints. Which action
should you take?
A. Check the logs for rogues in the area, then turn on rogue mitigation.
B. Seek out the source of the noise with a spectrum analyzer.
C. Manually increase the power of the AP to overcome the interference.
D. Increase the interference threshold from the default 10%.
Answer: B
certification Cisco certification 351-050 351-050 examen 351-050
NO.7 Lightweight Access Point Protocol or LWAPP is the name of a protocol that can control multiple Wi-Fi
wireless access points at once. How does the Cisco WCS know what has happened in an LWAPP system
when an AP's interface goes down and then comes up again?
A. The Cisco WCS polls the APs and when the AP is unreachable, reports "Max retransmissionsreached
on AP <name>".
B. The AP sends a linkDown then linkUp trap to the Cisco WCS; these are two of the six trapsdefined in
RFC 1215, A Convention for Defining Traps for use with the SNMP.
C. The AP cannot send a linkDown trap, as per RFC 1215, because the link is down; when thelink comes
back up, the AP sends a linkup trap to the Cisco WLC, which then forwards thetrap to the Cisco WCS.
D. The Cisco WLC sends a trap to the Cisco WCS when it detects that an AP is down.
Answer: D
Cisco 351-050 examen 351-050 351-050 351-050
NO.8 A VoWLAN user reports bad voice quality. Which three items most likely cause this problem? (Choose
three.)
A. Round trip delay is greater than 150 ms
B. Packet loss is greater than 1%
C. Jitter is greater than 30 ms
D. One-way delay is greater than 150 ms
Answer: B,C,D
Cisco 351-050 certification 351-050 certification 351-050
NO.9 What is the reason that using a tool like Cisco Spectrum Expert is important?
A. It maps the RF area to a floor plan.
B. It allows you to detect multipath.
C. It allows you to see the radiating environment at Layer 1.
D. It decodes WLAN IPS attacks
Answer: C
Cisco certification 351-050 certification 351-050 351-050
NO.10 For the following commands, which one can determine the health of a RADIUS server on an
autonomous AP?
A. show radius statistics
B. debug radius-server
C. show radius table {server_ip}
D. show radius-server {server_ip}
Answer: A
Cisco certification 351-050 351-050 351-050 examen 351-050 351-050 examen
NO.11 In the AP Layer 3 controller discovery process, after the LWAPP Discovery Request is broadcast on a
local subnet, which action will AP take next?
A. Send an LWAPP response to the master controller if known.
B. Send an LWAPP discovery request to controllers learned via OTAP if operational.
C. Wait 5 seconds and resend a Discovery Request to the local subnet.
D. Determine whether the controller responses are the primary controller.
Answer: B
Cisco 351-050 examen 351-050 certification 351-050
NO.12 Which two statements correctly describe RTS/CTS? (Choose two.)
A. When the transmitted packet is equal to or larger than the RTS threshold, an RTS packet issent. The
destination node must respond with a CTS packet before the originator can send thereal data packet.
B. Since the introduction of EDCA (WMM and 802.11e), the RTS/CTS sequence has beenrendered
unnecessary.
C. 802.11d replaced the RTS/CTS sequence with CTS to Self.
D. The RTS and CTS are small and, if lost in a collision, they can be retried more quickly and withless
overhead than if the whole packet must be retried.
Answer: A,D
Cisco 351-050 351-050 examen 351-050 examen
NO.13 In order to be able to communicate with the WDS master, what must be configured on the APs while
setting up a WLAN for Wireless Domain Services?
A. Username and password valid on the AAA server
B. Multicast group for the WDS
C. Ip address of the master WDS and any backup master WDS
D. Pre-shared key which matches that of the master WDS
Answer: A
Cisco 351-050 examen 351-050 351-050 examen certification 351-050 certification 351-050
NO.14 802.11i is a forthcoming specification that will clear up a number of security problems in 802.11. For
the following items, which 802.11i key can provide data origin authenticity during the four-way handshake
and the group key handshake messages?
A. Key Caching Key
B. Key Encryption Key
C. Groupwise Master Key
D. Key Confirmation Key
Answer: D
Cisco 351-050 certification 351-050
NO.15 It is suggested that you prime or stage your lightweight access points in a convenient location, rather
that after they have been installed in locations that may be difficult to reach. Which three items can be
configured by using the controller CLI, controller GUI, or Cisco WCS while priming a lightweight AP prior
to deployment? (Choose three.)
A. To configure the lightweight access point with primary, secondary, and tertiary controllernames
B. To configure the Controller Mobility Group name, if the lightweight access point is in aController
Mobility Group
C. To configure the access-point-specific LED blink sequence
D. To configure the access-point-specific 802.11a, 802.11b, and 802.11g network settings
Answer: A,B,D
Cisco 351-050 certification 351-050 351-050 examen 351-050
NO.16 Study the following situations carefully, then answer my question. Wireless client (CB21) configured for
SSID "CCIE-2"; IP address "dhcp". Configure standalone authonomous AP with three SSIDs and three
data VLANs plus the native VLAN. AAA server IP ranges:
VLAN-2:10.20.1.1.100-10.20.1.128 VLAN-3:10.30.1.1.100-10.30.1.128
VLAN-4:10.40.1.1.100-10.40.1.128
The user wants to get an IP address from VLAN-2 which is mapped to the SSID CCIE-2 the client is
associating. Why does this wireless client get a wrong IP address?
A. LEAP authentication fails due to wrong password or unknown username, therefore thewirelessclient is
mapped to the default VLAN.
B. The RADIUS server is not reachable from the AP, therefore the wireless client is mapped tothe default
VLAN.
C. LEAP needs "network-eap" <eap_methods> on the SSID. You must not configure "open
eap"<eap_methods.>
D. The RADIUS server assigned VLAN-4 during authentication/authorization process.
Answer: D
Cisco 351-050 351-050 examen 351-050 examen 351-050 examen
NO.17 The central office is currently using a combination of 4400 and 2100 series WLAN controllers running
v4.2 and a variety of LWAPP-enabled access points servicing both 2.4 GHz and 5 GHz. The WLAN
deployment has been extended to each remote office by implementing a 526 WLAN controller running
v4.1 and several 521 access points. Wireless client deployment uses EAP-TLS authentication by use of a
centralized RADIUS server plus 802.11n for performance. After the first remote office deployment, remote
office users complain that they are not connecting via 802.11n. Which will most likely cause this problem?
A. The 521 AP does not support 5 GHz, which prohibits 802.11n.
B. The 521 AP and 526 WLAN controllers do not support AES, which prohibits 802.11n.
C. The 526 WLAN controller does not support external authentication via RADIUS,
prohibitingauthentication.
D. The 526 WLAN controller does not support 802.11n with either v4.1 or v4.2.
Answer: D
Cisco certification 351-050 351-050 certification 351-050
NO.18 Tom works as a network administrator for a company. He is asked to manually configure the Tx power
on an 802.11b access point to a power level of 1 (100 mW) after implementing a Cisco 7921G wireless IP
phone within a Cisco Unified Wireless Network. Which problem is the user likely to experience when the
phone associates to the AP?
A. One-way audio
B. Loss of connectivity to Cisco Unified Communications Manager
C. Audio delay or jitter or both
D. The phone displays a "network busy" status message
Answer: A
Cisco 351-050 certification 351-050
NO.19 Which two actions will happen when a wireless client deploys a Layer 2 roam between two WLCs with
management IP addresses on different IP subnets but dynamic interfaces in the same VLAN? (Choose
two.)
A. The new WLC exchanges mobility messages with the original WLC and the client databaseentry is
moved to the new WLC.
B. The client database entry is maintained on both the original and new WLCs.
C. The original WLC marks the client with an "Anchor" entry in its own client database.
D. The client database entry is removed from the original WLC once it has been entered into thenew
WLC.
Answer: A,D
Cisco certification 351-050 351-050
NO.20 Which two options are correct according to debug output presented in the following exhibit? (Choose
two.)
A. The wireless client uses a static IP address, so "0.0.0.0 START (0)" can be found in the logs.
B. The wireless client has been successfully authenticated. Reauthentication is set to occur on
anextremely aggressive schedule (every five seconds).
C. The wireless client "hangs" in probes (does not proceed with 802.11 authentication andassociation). It
is likely that the "encryption" or "key-management" advertised in the proberesponse does not match.
D. Since the AP receives a probe request from the wireless client, the Access Point Functionsstate for the
machine changes from "Idle" to "Probe."
Answer: C,D
Cisco 351-050 351-050 examen certification 351-050 certification 351-050 351-050
NO.21 A user complains about problems authenticating via wireless. Which two of the Cisco WLC debug
commands below would solve this problem? (Choose two.)
A. debug mac { addr MAC}
B. debug client authentication enable
C. debug dot1x events enable
D. debug client events enable
Answer: A,C
Cisco certification 351-050 351-050 351-050 examen
NO.22 Refer to the following options, which two are long-term solutions to hidden node problems? (Choose
two.)
A. Enable CTS to Self
B. Change the RF situation by increasing the power on client work stations (None-AP-STA)
C. Increase the radio speed to at least 24 Mb/s
D. Change the RF situation by adding additional access points
Answer: B,D
Cisco certification 351-050 certification 351-050
NO.23 Observe the following options carefully, which functionality, as defined by IEEE 802.11e, does WWM
certify as part of the tests for QoS done by the WiFi Alliance?
A. EDCA
B. HCCA
C. Direct Link Setup
D. S-APSD
Answer: A
certification Cisco 351-050 351-050
NO.24 You work as a network technician at Company.com, read this subject carefully ,then answer the
question. The existing Cisco Unified Wireless Controller is running v5.0 code for both the controllers and
the Cisco WCS. A controller has been configured with an appropriate rogue rule condition to report
discovered APs to the Cisco WCS. What default alarm level is used to display all rogue APs in the Alarm
Summary?
A. Major
B. Critical
C. Flash
D. Minor
Answer: D
Cisco 351-050 351-050 examen
NO.25 You work as a network engineer .If the WLAN interfaces configured on the different controllers are on
different IP subnets (Layer 3 inter-controller roaming), can you telle me what will happen when a client
roams from one controller (controller A) to a new controller (controller B)?
A. Controller A will mark the client's entry in its client database as an anchor, controller B will notupdate its
client database because of the anchored entry in controller A, and all ingress andegress traffic will flow
through controller A.
B. Controller A will mark the client with an anchor entry in its client database, the database, andthe
database entry will be copied to controller B and marked with a foreign entry.
C. Controller A will mark the client's entry in its client database as foreign, controller B will updateits client
database, all ingress traffic will flow through controller A, and egress traffic will flowthrough controller B
when symmetric tunneling is disabled.
D. Controller B will update its client database and all client ingress and egress traffic will transitionto the
new controller.
Answer: B
Cisco examen 351-050 examen 351-050 351-050 certification 351-050
NO.26 Which is the objective of a radome?
A. To reduce the mechanical load from wind
B. To indicate which way the antenna is pointing
C. To increase the gain of an antenna
D. To mitigate interference
Answer: A
Cisco 351-050 examen certification 351-050 351-050
NO.27 Cisco Client Management Frame Protection is running on a mobility group with two controllers. For the
following options ,which two MFP requirements protect the network?
(Choose two.)
A. Requires the use of a nonbroadcast SSID
B. Requires CCXv5
C. Implements the validation of wireless management frames
D. Forces clients to authenticate, using a secure EAP method only
Answer: B,C
Cisco examen 351-050 351-050
NO.28 Do you know at what distance the curve of the earth factors into the antenna elevation calculation?
A. Greater than 6 miles (~10 km)
B. 60% of the Fresnel zone
C. Greater than 26 miles (~42 km)
D. The width of the Fresnel zone, which varies depending on the distance by which the bridgesare
separated
Answer: A
Cisco certification 351-050 351-050 351-050 examen
NO.29 Can you tell me what the LWAPP data and control port numbers are?
A. TCP 16666 and 16667
B. UDP 16666 and 16667
C. TCP 12124 and 12134
D. UDP 12222 and 12223
Answer: D
Cisco examen 351-050 351-050 examen
NO.30 Observe the following statements, which limitation applies to the use of the Cisco WLAN Solution
Management over Wireless feature?
A. Read-write access is not available; only read-only access is supported.
B. Controllers must be managed using only secure protocols (that is, SSH and HTTPS), notnonsecure
protocols (that is, HTTP and Telnet).
C. Uploads and downloads from the controller are not allowed.
D. Wireless clients can manage other controllers however not the same controller and AP towhich the
client is associated.
Answer: C
Cisco examen 351-050 examen 351-050
Le test Certificat Cisco 351-050 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Cisco 351-050. Vous allez prendre toutes essences du test Cisco 351-050 dans une courte terme.
没有评论:
发表评论