2013年12月11日星期三

Le matériel de formation de l'examen de meilleur EMC E20-005

Si vous traviallez dur encore pour préparer le test de EMC E20-005 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test EMC E20-005.

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test EMC E20-005.

Code d'Examen: E20-005
Nom d'Examen: EMC (Backup Recovery Systems and Architecture Exam)
Questions et réponses: 120 Q&As

Pass4Test a de formations plus nouvelles pour le test EMC E20-005. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test EMC E20-005 à tous les candidats qui nous choisissent. L'importance de Certification EMC E20-005 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.

Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.

Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test EMC E20-005. Ajoutez la Q&A au panier.

Vous pouvez tout d'abord télécharger le démo EMC E20-005 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.

Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.

E20-005 Démo gratuit à télécharger: http://www.pass4test.fr/E20-005.html

NO.1 A full backup of a file system is performed once a week on Saturday and cumulative backups are
performed on all other days. Backups start at 20:00 with a two-hour window. Data on the file system
changes every day.
How many backups are required to perform a full system restore as of Friday morning?
A. 2
B. 6
C. 1
D. 7
Answer: A

EMC   certification E20-005   E20-005 examen

NO.2 Which disk connectivity option supports the highest data transfer rate?
A. SATA
B. SCSI
C. IDE
D. ATA
Answer: A

EMC examen   certification E20-005   E20-005   E20-005

NO.3 What is a benefit of deploying a separate storage node in the backup environment?
A. Reduced number of backups
B. Increased media utilization
C. Improved security and access control
D. Consolidate backup servers
Answer: D

EMC   E20-005 examen   E20-005   E20-005

NO.4 Which statement defines retention period?
A. Amount of time available for restoring a particular version of a backup dataset
B. Amount of time available for overwriting a volume containing backups
C. Period of time in which a backup must be restored
D. Amount of time allocated for full system recovery
Answer: A

certification EMC   certification E20-005   E20-005

NO.5 What is recovery point objective?
A. Maximum allowable time to fully recover an application
B. Actual time that it takes to recover all data
C. Amount of data loss that is acceptable by the business
D. Length of time that backups are kept for recovery purposes
Answer: C

EMC examen   E20-005   E20-005

NO.6 A business has a recovery point objective (RPO) of nine hours. What does this RPO mean in the event
of a disaster?
A. No more than nine hours of production data can be lost
B. Restore from backup must occur within nine hours
C. Production must be resumed within nine hours
D. A backup copy of the production data must be obtained within nine hours
Answer: A

certification EMC   certification E20-005   certification E20-005   E20-005 examen   E20-005

NO.7 What is an example of a PCI connection?
A. Parallel interface between a disk and the controller card
B. Interconnection between a CPU and network card
C. Serial connection between a disk and the controller card
D. Interconnection between a tape drive and a computer
Answer: B

certification EMC   E20-005   certification E20-005   E20-005

NO.8 Which type of backup only copies the files that have changed since the last full backup.?
A. Cumulative
B. Full
C. Incremental
D. Synthetic full
Answer: A

EMC examen   E20-005   E20-005 examen

NO.9 What terminology is used to describe grouping several physical drives into one logical drive?
A. Concatenation
B. Partitioning
C. Formatting
D. Grouping
Answer: A

EMC   E20-005   E20-005   E20-005

NO.10 You are planning the staging policy for disk-to-offsite tape backup media. In addition to available disk
space, which factor is most significant when determining how long to keep the backup data on disk?
A. Length of time when most restore requests are expected to occur
B. Location of offsite storage
C. Cost of shipping and storing tapes
D. Tape capacity
Answer: A

EMC   E20-005   E20-005

NO.11 A customer is moving data from a backup disk to tape, which will later will be stored offsite.
What is this process called?
A. Cloning
B. Staging
C. Aging
D. Mirroring
Answer: B

certification EMC   E20-005   certification E20-005

NO.12 What is the role of the storage node in a client/server backup architecture?
A. Writes data to a backup device
B. Gathers data to be backed up
C. Manages the backup operation
D. Writes metadata to the backup catalog
Answer: A

certification EMC   certification E20-005   E20-005   certification E20-005   E20-005

NO.13 What are the components of a Logical Volume Manager (LVM)?
A. Physical volumes, volume groups, logical volumes
B. Physical groups, volume groups, logical volumes
C. Physical groups, volume groups, logical groups
D. Physical blocks, volume groups, logical groups
Answer: A

EMC   E20-005   certification E20-005   E20-005 examen

NO.14 What is the fault tolerance of a RAID 5 array, where n is the number of disks in the array?
A. 1
B. n-1
C. 2
D. n-2
Answer: A

EMC   E20-005   E20-005   E20-005 examen   E20-005

NO.15 What is the primary reason for having disaster recovery backups?
A. To restore data from an alternate site due to data loss at a primary site
B. To restore data when data loss or logical corruptions occur during routine processing
C. To restore data that was archived for regulatory compliance
D. To restore data when data loss occurs due to minor hardware component failures
Answer: A

certification EMC   E20-005 examen   E20-005 examen

NO.16 Which software component of a backup application sends media metadata to the backup server?
A. Storage node
B. Client
C. NetWorker Management Console
D. Application server
Answer: A

EMC   E20-005   E20-005 examen   E20-005

NO.17 A customer has a requirement to restore operations within two hours after a disaster.
What is this time period called?
A. Recovery time objective (RTO)
B. Retention period
C. Recovery point objective (RPO)
D. Backup window
Answer: A

EMC   E20-005 examen   E20-005

NO.18 Which type of backup should be used to create a backup copy offline without disrupting I/O operations
on a production volume?
A. Cumulative backup
B. Incremental backup
C. Full backup
D. Synthetic full backup
Answer: D

EMC   certification E20-005   E20-005   E20-005

NO.19 What is the process of moving data from one storage medium to another?
A. Cloning
B. Replication
C. Staging
D. Twinning
Answer: C

certification EMC   E20-005 examen   E20-005

NO.20 What is the interval of time between the creation and expiration of the backup called?
A. Retention period
B. Recovery point objective (RPO)
C. Recovery time objective (RTO)
D. Backup window
Answer: A

EMC   E20-005   certification E20-005   E20-005 examen

Pass4Test est un catalyseur de votre succès de test EMC E20-005. En visant la Certification de EMC, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test EMC E20-005, la Q&A EMC E20-005 est un bon choix pour vous.

没有评论:

发表评论