Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat Citrix 1Y0-A21 est bien autorisé. Avec le certificat Citrix 1Y0-A21, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A Citrix 1Y0-A21.
Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.
Finalement, la Q&A Citrix 1Y0-A21 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Citrix 1Y0-A21 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Citrix, vous aurez un meilleur salaire et une plus grande space à se développer.
Le test Citrix 1Y0-A21 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Citrix 1Y0-A21 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.
Code d'Examen: 1Y0-A21
Nom d'Examen: Citrix (Basic Administration for Citrix NetScaler 9.2)
Questions et réponses: 104 Q&As
Pass4Test a une grande équipe composée des experts d'expérience dans l'industrie IT. Leurs connaissances professionnelles et les recherches font une bonne Q&A, qui vous permet à passer le test Citrix 1Y0-A21. Dans Pass4Test, vous pouvez trouver une façon plus convenable à se former. Les resources de Pass4Test sont bien fiable. Choisissez Pass4Test, choisissez un raccourci à réussir le test Citrix 1Y0-A21.
1Y0-A21 Démo gratuit à télécharger: http://www.pass4test.fr/1Y0-A21.html
NO.1 Scenario: A network administrator needs to configure VLANs on a NetScaler to support multiple
networks. The NetScaler is connected through interface 1/1 to a switch port where VLAN10 is configured.
This NetScaler is also connected through interface 1/2 to a switch port that is configured for VLAN20.
Given this scenario, which two steps does the administrator need to take to configure the NetScaler for
VLAN10? (Choose two.)
A. add vlan 10
B. set vlan 10 -ifnum 1/1
C. bind vlan 10 -ifnum 1/2
D. bind vlan 10 -ifnum 1/1
E. bind vlan 10 -ifnum 1/1 -tagged
Answer: A, D
certification Citrix 1Y0-A21 1Y0-A21 examen certification 1Y0-A21
NO.2 Scenario: A company has contracts with multiple ISPs and would like to use all of them for Internet
connections. The company also plans to use a NetScaler system for load balancing and failover.
What can an administrator configure to ensure that all ISP connections are being used and return traffic
maintains the same path as the inbound traffic in this environment?
A. Round robin load balancing with INAT configured
B. Link load balancing with RNAT and USNIP enabled
C. Multiple VLANs with Ingress rules and USIP enabled
D. A load balancing policy with the appropriate preferred IP and preferred port parameters configured
Answer: B
certification Citrix 1Y0-A21 examen 1Y0-A21 examen 1Y0-A21 examen 1Y0-A21
NO.3 Scenario: An administrator is working with a Citrix consultant to architect and implement a NetScaler
solution. They plan to use GSLB and DNS views in the environment.
In which two manners can the administrator configure the NetScaler system to be able to configure DNS
views that support GSLB records? (Choose two.)
A. Configure as an ADNS.
B. Configure as a DNS proxy.
C. Configure CNAME records.
D. Configure as an End resolver.
Answer: A, B
Citrix 1Y0-A21 certification 1Y0-A21 1Y0-A21 1Y0-A21 1Y0-A21 examen
NO.4 Which IP address type must be unique to each NetScaler in an HA pair?
A. MIP
B. NSIP
C. SNIP
D. Load balancing VIP
Answer: B
Citrix certification 1Y0-A21 1Y0-A21 certification 1Y0-A21 1Y0-A21 examen
NO.5 Scenario: An administrator needs to configure a NetScaler device so that a set of back-end servers in a
LAN can initiate connections to the Internet. ACLs are configured in this environment. What must the
administrator configure to meet the needs of this scenario?
A. INAT on the servers in the LAN
B. RNAT for the destination IP addresses
C. NAT on the router to the NetScaler device
D. RNAT for the subnet that includes the LAN IP addresses
E. RNAT on the virtual servers bound to the servers in the LAN
Answer: D
Citrix certification 1Y0-A21 1Y0-A21 examen 1Y0-A21 1Y0-A21 1Y0-A21
NO.6 In which two ways could an administrator configure a NetScaler system to allow a Web server log to
record the original client IP addresses for incoming traffic? (Choose two.)
A. USIP
B. INAT
C. USNIP
D. Edge mode
E. Client IP insertion
Answer: A, E
Citrix 1Y0-A21 certification 1Y0-A21 certification 1Y0-A21
NO.7 An administrator needs to configure a NetScaler system to dynamically advertise virtual IP addresses,
directly connected routes and static routes to the upstream routers.
What must the administrator ensure is configured on the NetScaler system for this environment?
A. RNAT
B. L3 mode
C. Static Routes
D. Health Check monitor
E. Route Health Injection (RHI)
Answer: E
Citrix certification 1Y0-A21 1Y0-A21 1Y0-A21 examen
NO.8 Scenario: A customer has an HA pair configured and is making interface configuration changes on the
primary node. However, the administrator notices that the changes are NOT being propagated to the
secondary node.
What is the reason for this behavior?
A. Propagation is not enabled.
B. HA pair licensing is missing.
C. Propagation is enabled, but synchronization is disabled.
D. Interface configuration changes must be performed on each node.
Answer: D
Citrix 1Y0-A21 1Y0-A21
NO.9 Scenario: A customer has two datacenters in geographically dispersed locations, both serving content
for a web-based application. Content for both datacenters should always be available.
Which method should an administrator use to make content from both datacenters available at all times?
A. HA
B. GSLB
C. Content switching
D. Backup load balancing virtual servers
Answer: B
Citrix 1Y0-A21 1Y0-A21 examen 1Y0-A21
NO.10 Scenario: An administrator is managing a network environment that contains five datacenters, all of
which are in different areas of the same country. The administrator plans to configure the NetScaler
system to load balance the datacenters so that they can be used for disaster recovery.
How should the administrator configure the NetScaler system for disaster recovery and to optimize the
user experience?
A. Enable HA and use cache load balancing.
B. Enable HA and use server load balancing.
C. Enable GSLB and use the proximity method.
D. Enable GSLB and use the round robin method.
Answer: C
Citrix 1Y0-A21 1Y0-A21 1Y0-A21
NO.11 A network administrator wants to ensure that connection multiplexing is enabled for all client
connections that hit a virtual server. Which service type should the administrator select to enable
connection multiplexing?
A. SSL
B. FTP
C. TCP
D. HTTP
Answer: D
certification Citrix 1Y0-A21 1Y0-A21 1Y0-A21 examen
NO.12 Scenario: A company has contracts with multiple ISPs and would like to use all of them for Internet
connections although some ISP routers are faster than others. The company also plans to use a
NetScaler system for load balancing and failover.
What can an administrator configure to ensure that all ISP connections are being used while avoiding
retransmission or out-of-order packets in this environment?
A. Multiple VLANs with Ingress rules
B. Link load balancing with destination IP-based persistence
C. Round robin load balancing with reverse RNAT configured
D. A load balancing policy with the appropriate preferred IP and preferred port parameters configured
Answer: B
certification Citrix certification 1Y0-A21 certification 1Y0-A21 1Y0-A21 examen 1Y0-A21
NO.13 Scenario: A network administrator needs to configure routing on a NetScaler appliance. The NetScaler
is in a DMZ whose gateway is 10.54.80.1/24. There are no configured routes on the NetScaler.
Given this topology, which is the appropriate routing configuration for the NetScaler?
A. set default route 10.54.80.1
B. add route 0.0.0.0 0.0.0.0 10.54.80.1
C. set default route 0.0.0.0 0.0.0.0 10.54.80.1
D. add route 0.0.0.0 255.255.255.255 10.54.80.1
Answer: B
Citrix examen certification 1Y0-A21 1Y0-A21 examen certification 1Y0-A21 1Y0-A21 examen
NO.14 In which manner can an administrator configure a NetScaler device so that it can load balance external
DNS servers.?
A. Configure as an ADNS.
B. Configure CNAME records.
C. Configure as a DNS proxy.
D. Configure as an End resolver.
Answer: C
certification Citrix 1Y0-A21 examen 1Y0-A21 certification 1Y0-A21
NO.15 Scenario: A financial company needs to maintain end-to-end security in network traffic. The company
also requires that an administrator reduce the CPU levels for back-end servers in their environment
because it requires end-to-end security.
Which setting on the SSL virtual server reduces CPU utilization on the back-end?
A. SSLv3
B. SSL Redirect
C. SSL Session Reuse
D. SSL Client Certificates
Answer: C
Citrix 1Y0-A21 1Y0-A21 examen 1Y0-A21 examen 1Y0-A21 examen
En quelques années, le test de certification de Citrix 1Y0-A21 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Citrix 1Y0-A21? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification 1Y0-A21. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification 1Y0-A21, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.
没有评论:
发表评论