Le produit de Pass4Test peut assurer les candidats à réussir le test CompTIA RF0-001 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.
C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.
Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test CompTIA RF0-001. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.
Un bon choix de l'outil à se former est le point essentiel à passer le test CompTIA RF0-001, et les documentations à propos de rechercher le test CompTIA RF0-001 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.
La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test CompTIA RF0-001.
Code d'Examen: RF0-001
Nom d'Examen: CompTIA (RFID+ Certification)
Questions et réponses: 162 Q&As
Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test CompTIA RF0-001 et passer le test à la première fois.
C'est pas facile à passer le test Certification CompTIA RF0-001, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test CompTIA RF0-001 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test CompTIA RF0-001, vous allez passer le test CompTIA RF0-001 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.
RF0-001 Démo gratuit à télécharger: http://www.pass4test.fr/RF0-001.html
NO.1 Desktop industrial RFID-enabled bar code printers handle an inoperative tag by:
A. sending an error to the host.
B. printing 'void' or some other marking on the label.
C. ejecting the label.
D. ignoring it and continuing.
Answer: B
certification CompTIA certification RF0-001 RF0-001 examen certification RF0-001
NO.2 For a corrugated case filled with liquor bottles containing metal lids, all of the following locations are
acceptable for optimizing the performance of a passive high frequency (HF) RFID smart label EXCEPT on
the: (Select TWO).
A. side near the bottom where there is the most amount of liquid.
B. side near the top where there is the least amount of liquid.
C. bottom where there is the most amount of glass.
D. top near the metal lids.
Answer: AD
certification CompTIA certification RF0-001 RF0-001 RF0-001 certification RF0-001
NO.3 Ideally, as a tag passes though the antenna read window it should be:
A. inside metal foil.
B. on the same plane as the antenna.
C. at least 30 feet (9.3 meters) from the antenna.
D. facing away from antenna.
Answer: B
CompTIA certification RF0-001 certification RF0-001 RF0-001
NO.4 Which of the following RFID tags would be BEST for inconspicuous tagging of assets containing a
maximum of eight bytes of data and are inductively coupled?
A. Active 433.92 MHz tag with strategically installed fixed interrogators.
B. Passive 13.56 MHz tag that is affixed to the asset and camouflaged requiring continuous loop
interrogation.
C. Passive Gen 2 tag requiring line of sight backscatter interrogation.
D. Active 433.92 MHz tag requiring modulated backscatter interrogation.
Answer: B
CompTIA examen RF0-001 RF0-001 examen RF0-001 examen certification RF0-001
NO.5 All of the following are true of widely implemented "slap and ship" programs EXCEPT they:
A. make it difficult to optimize label application for the container.
B. are more susceptible to electrostatic discharge (ESD) than in-line automatic applicators.
C. are lower in cost than application in manufacturing.
D. are more likely to break the bond between the antenna and the chip.
Answer: C
certification CompTIA RF0-001 examen RF0-001 examen certification RF0-001
NO.6 When troubleshooting an interrogation zone, an operator observes that the interrogator is not
responding to external input or reading tags. The lights are on indicating it has power and network
connectivity. Which of the following would be the next step for the operator to take?
A. Replace the antenna cable.
B. Replace the interrogator.
C. Reboot the interrogator.
D. Reboot the antenna.
Answer: C
CompTIA RF0-001 examen RF0-001 examen certification RF0-001
NO.7 In a facility with several automated print and apply printers, cases frequently get to the palletizer without
RFID labels. One way to correct this is to:
A. install an interrogation zone down stream from the labeler with a reject system.
B. have an interrogator on the palletizer.
C. use better quality labels.
D. use a hand-held interrogator to scan for missing labels at end of production line.
Answer: A
certification CompTIA certification RF0-001 certification RF0-001
NO.8 Which of the following materials have absorptive properties in relation to ultra high frequency (UHF)?
(Select TWO).
A. Damp cardboard
B. Glass
C. Conductive liquids
D. Metal
Answer: AC
CompTIA examen RF0-001 certification RF0-001 RF0-001 certification RF0-001 RF0-001
NO.9 When firmware upgrades become available, which of the following should the technician consider
FIRST?
A. How to install the upgrade.
B. When to schedule the upgrade.
C. Whether the upgrade can be downloaded from the internet.
D. The benefits of new upgrade.
Answer: D
certification CompTIA RF0-001 examen RF0-001 examen
NO.10 It is important to know where an RFID inlay is located within a tag during printing because: (Select
TWO).
A. the inlay location directs the printer to print landscape or portrait.
B. the inlay sets the speed of the printer.
C. printing over the chip may cause damage.
D. timing from leading edge is critical to the encoding process.
Answer: CD
certification CompTIA RF0-001 examen RF0-001 RF0-001 examen
NO.11 Cases are going to be tagged and stored in a humid, high temperature area. Which of the following
types of labels would be needed?
A. Poly-coated with gum adhesive.
B. Direct thermal with gum adhesive.
C. Poly-coated with water base adhesive.
D. Paper with gum adhesive.
Answer: A
CompTIA RF0-001 RF0-001
NO.12 RFID media should be stored in:
A. electrostatic discharge (ESD) protected packaging.
B. metal containers.
C. rolls of ten.
D. the order that it was received.
Answer: A
CompTIA RF0-001 RF0-001 RF0-001
NO.13 Which of the following technologies would provide the BEST read range when attached to a
corrugated metal freight container that is 40 feet (12.4 meters)?
A. Passive 13.56 MHz from a one watt interrogator/antenna
B. Passive 860 - 960 MHz from a 4 watt interrogator/antenna C. Active 433.92 MHz, operating at 10 mW
D. Active 2450 MHz, operating at 10 mW
Answer: C
CompTIA certification RF0-001 RF0-001
NO.14 Tags placed on small boxes uniformly stacked on a pallet are unreadable unless the pallet is rotated.
This is a symptom of tag:
A. propagation.
B. size.
C. shadowing.
D. polarity.
Answer: C
CompTIA RF0-001 RF0-001 RF0-001 RF0-001 certification RF0-001
NO.15 Loss of connection between an interrogator and the edgeware/middleware would result in which of the
following?
A. Only active RFID tag data would be processed.
B. No tag data would be processed.
C. Tag data would be sent directly to the Warehouse Management System (WMS).
D. Only interrogator status would be tracked.
Answer: B
CompTIA examen RF0-001 certification RF0-001 certification RF0-001 RF0-001
NO.16 An Electronic Product Code (EPC) Class 1 Gen 2 RFID system reads the EPC data from memory bank
zero, but the 64-bit EPC code is always zero. Which of the following is MOST likely the cause of the
problem?
A. The EPC code is stored in Bank 1.
B. The tag has been killed.
C. The EPC code was never written to the tag.
D. The access password is zero.
Answer: A
CompTIA examen RF0-001 examen RF0-001 examen certification RF0-001 RF0-001 RF0-001
NO.17 A company wants to track personnel using RFID with a resolution within 10 feet (3.1 meters). Which of
the following RFID systems would provide the BEST results?
A. Active Real Time Locating System (RTLS)
B. Passive ultra high frequency (UHF) RFID system with hand-held interrogators
C. Passive high frequency (HF) RFID system with interrogators at entry points
D. Global Positioning System (GPS)
Answer: A
CompTIA RF0-001 RF0-001 RF0-001
NO.18 Which of the following conditions would be MOST likely to cause a ghost tag read?
A. The interrogator did not pass electronic product code (EPC) compliance testing.
B. There is a broken strap between the chip and the antenna on the tag.
C. There are too many tags within an interrogator zone.
D. There is RF interference in an interrogator zone.
Answer: D
CompTIA examen RF0-001 RF0-001
NO.19 While troubleshooting an interrogation zone, a technician discovers that the antenna wires have torn
free of their connectors. Which of the following would be the FIRST step for the technician to take?
A. Secure the cables so they cannot tear free again.
B. Crimp a new end on the cable.
C. Power down the interrogator.
D. Attach the repaired cable to the antenna.
Answer: C
CompTIA RF0-001 certification RF0-001 RF0-001
NO.20 A new batch of tags is received for an existing system. When the new tags are introduced into the
system, the interrogation zones stop transmitting tag data. Which of the following is MOST likely the
source of the problem?
A. The new tags are all bad.
B. The new tags are the wrong type for the system.
C. A tag virus has been introduced by the new tags.
D. The interrogators have issued the kill command to the tags.
Answer: B
CompTIA examen RF0-001 RF0-001 certification RF0-001
Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A CompTIA RF0-001. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test CompTIA RF0-001 sans aucune doute.
没有评论:
发表评论