Dernières Microsoft 070-662 de la pratique de l'examen questions et réponses téléchargement gratuit

La partie plus nouvelle de test Certification Microsoft 070-662 est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel Microsoft 070-662. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.

Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test Microsoft 070-662. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.

On peut voir que beaucoup de candidats ratent le test Microsoft 070-662 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Microsoft 070-662 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Microsoft 070-662, Pass4Test peut offrir les Q&As des autres test Certification IT.

Code d'Examen: 070-662
Nom d'Examen: Microsoft (TS: Microsoft Exchange Server)
Questions et réponses: 395 Q&As

Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test Microsoft 070-662.

070-662 Démo gratuit à télécharger: http://www.pass4test.fr/070-662.html

NO.1 You have an Exchange Server 2010 Service Pack1 (SP1) organization. The organization contains the
servers configured as shown in the following table
The Mailbox servers are members of a database availability group (DAG) named DAG1.
You need to configure DAG1 to use a static DAG IP 192.168.1.100
Which Windows PowerShell cmdlet should you run?
A. Set-MailboxServer
B. Set-DatabaseAvailabilityGroup
C. New-DatabaseAvailabilityGroup
D. Add-MailboxDatabaseCopy
E. Add-DatabaseAvailabilityGroupServer
F. Set-MailboxDatabase
G. Set-ClientAccessServer
H. Set-ClientAccessArray
I. Set-PublicFolderDatabae
J. New-PublicFolderDatabase
K. Add-RoleGroupMember
L. Set-MailbxDatabaseCopy
M. New-MailboxDatabase
Answer: B

certification Microsoft   070-662 examen   certification 070-662

NO.2 Your network contains an Active Directory domain. The domain contains one site.
You have an Exchange Server 2010 Service Pack 1 (SP1) organization that contains two Client
Accessservers, two Hub Transport servers, and three Mailbox servers.
The mailbox servers are members of a database availability group (DAG) named DAG1.
You have a mailbox database named DB1.You configure two mailbox database copies of DB1.You verify
that both mailbox database copies have a status of Healthy.
You need to ensure that an administrator is notified when the health status of a mailbox database
copychanges.
What should you run from the Exchange Management Shell?
A. Test-WebServicesConnectivity
B. Test-SystemHealth
C. Test-AvailabilityService
D. checkdatabaseredundancy.ps1
E. Test-ReplicationHealth
F. Test-SmtpConnectivity
G. Get-MailboxDataboxCopyStatus
H. Retry-Queue
I. Test-MailFlow
J. Get-MailboxDatabase
K. Test-SenderId
L. Get-SenderIdConfig
M. Test-MapiConnectivity
N. Test-OutlookWebServices
Answer: D

Microsoft examen   certification 070-662   certification 070-662   070-662 examen   070-662

NO.3 You have an Exchange organization. All servers in the organization have Exchange Server 2010 SP1
installed.
You need to ensure that an equipment mailbox can be scheduled for meetings that occur during working
hours only.
What should you do from the properties of the mailbox?
A. Configure the Mailbox Features settings.
B. Configure the Resource Policy settings.
C. Enable the Resource Booking Attendant.
D. Configure the Resource In-Policy Requests settings.
E. Configure the Mail Flow settings.
F. Configure the Account settings.
G. Configure the Resource Out-of-Policy Requests settings.
H. Configure the Resource Information settings.
Answer: B

certification Microsoft   070-662   070-662   070-662   070-662 examen

NO.4 Your network contains an Active Directory domain named contoso.com. All domain controllers run
Windows Server 2008 R2.You have a server named Server1 that runs Windows Server 2008 R2 Service
Pack 1 (SP1).You plan to install the following Exchange Server 2010 SP1 server roles on
Server1:-Mailbox-Client Access-Hub Transport
You need to prepare Served for the planned installation. You import the Server Manager module for
Windows Power Shell.
What should you do next?
A. From Windows PowerShell, run add-windowsfeature net-framework,rsat,adlds.
B. At the command prompt, run servermanagercmd and use the Exchange-Typical.xml template.
C. From Windows PowerShell, run add-windowsfeature net-framework. From the Exchange Server 2010
installation program, select the Automatically install Windows Server roles and features required for
Exchange Server check box.
D. At the command prompt, run servermanagercmd and use the Exchange-Elase.xml template.
E. At the command prompt, run setup /pl. From the Exchange Server 2010 installation program, select the
Automatically install Windows Server roles and features required for Exchange Server check box.
F. From Windows PowerShell, run add-windowsfeature
net-framework,rsat-adds,web-server,web-basic-auth.
Answer: C

Microsoft examen   070-662   070-662   070-662   070-662 examen   certification 070-662

NO.5 Your network contains an Active Directory forest named fabrikam.com. The forest contains an
Exchange Server 2010 Service Pack 1 (SP1) organization.
All client computers run Microsoft Office Outlook 2003.A server named Ex1 hosts all public folders. You
upgrade all of the client computers to Outlook 2010.You need to remove all of the public folders from Ex1.
What should you do first.?
A. Modify the offline address book (OAB) distribution settings.
B. Modify the properties of the mailbox database.
C. Delete all of the public folders from the public folder database.
D. Perform an offline defragmentation of the public folder database files.
Answer: A

certification Microsoft   070-662   070-662   070-662   070-662 examen

NO.6 You have a hosted Exchange organization. All servers in the organization have Exchange Server 2010
SP1 installed.
You need to group a set of users for administrative delegation.
What should you create?
A. A new distribution group
B. A new management role
C. a managed folder mailbox policy
D. a new role assignment
Answer: D

Microsoft   certification 070-662   certification 070-662   070-662

NO.7 You have an Exchange Server 2010 Service Pack1 organization. The Organization contains a
HubTransport server named Server1 and an Edge Transport sever named server2.All servers are
configured to use an internal DNS named DNS1 for host resolution.
You configure an Edge Subscription from Server1 to Server2.You deploy a monitoring server named
ServerApp1. ServerApp1 will send email notification toadministrators.
You need to ensure that ServerApp1 can relay email to the administrators through Server1.
What should you do?
A. From the Exchange Management Shell, run the Set-TransportServer cmdlet.
B. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.
C. From the Exchange Management Console (EMC), create a transport rule.
D. From the Exchange Management Console (EMC), modify the properties of the remote domain.
E. From the Exchange Management Shell, run the Set-receiveConnector cmdlet.
F. From the Exchange Management Console (EMC), disable the IP Block List feature.
G. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
H. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.
Answer: E

Microsoft examen   070-662   070-662 examen   070-662 examen

NO.8 You have an Exchange Server 2010 Service Pack1 organization. The Organization contains a Hub
Transport server named Server1 and an Edge Transport sever named server2.
All servers are configured to use an internal DNS named DNS1 for host resolution.
You configure an Edge Subscription from Server1 to Server2.
You need to modify the delayed acknowledgment (ACK) setting of Server2.
What should you do?
A. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
B. From the Exchange Management Console (EMC), create a transport rule.
C. From the Exchange Management Shell, run the Set-TransportServer cmdlet.
D. From the Exchange Management Shell, run the Set-ReceiveConnector cmdlet.
E. From the Exchange Management Console (EMC), disable the IP Block List feature.
F. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.
G. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.
H. From the Exchange Management Console (EMC), modify the properties of the remote domain.
Answer: D

Microsoft   070-662   certification 070-662

NO.9 You have an Exchange Server 2010 Service Pack 1 (SP1) organization named contoso.com.
All users access their mailbox by using Microsoft Outlook 2010.You need to ensure that the users can
prevent sensitive email messages from being forwarded to otherrecipients.
What should you first?
A. Configure Transport Layer Security (TLS) on all Send connectors
B. Install Active Directory Rights Management Services (AD RMS).
C. Run the Set-TransportConfig cmdlet.
D. Deploy Secure MIME.
Answer: B

Microsoft examen   certification 070-662   070-662

NO.10 You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The SMTP domain for
theorganization is contoso.com.
You enable the Exchange anti-spam features. You need to specify a quarantine mailbox for the Exchange
organization.
What should you do?
A. From the Exchange Management Console (EMC), modify the Content Filter agent.
B. Run the Set-ContentFilterConfig cmdlet from the Exchange Management Shell.
C. Run the Set-TransportConfig cmdlet from the Exchange Management Shell.
D. From the Exchange Management Console (EMC), modify the Recipient Filter agent.
E. Run the New-TransportRule cmdlet from the Exchange Management Shell.
F. Run the Set-OrganizationConfig cmdlet from the Exchange Management Shell.
G. From the Exchange Management Console (EMC), modify the Sender Filter agent.
H. Run the New-JournalRule cmdlet from the Exchange Management Shell.
Answer: B

Microsoft   070-662   070-662   070-662

NO.11 Your network contains two Active Directory forests named contoso and nwtraders. The contoso forest
contains Exchange 2003 SP2 Servers. The nwtraders forest contains Exchange 2010 SP1 Servers.
You need to move all mailboxes from contoso to nwtraders.
What should you do from nwtraders forest?
A. Create a mail enabled contact for each mailbox in contoso. Run the Move-Mailbox cmdlet.
B. Create a mail enabled user for each mailbox in contoso. Run the New-MoveRequest cmdlet.
C. Create a linked mailbox for each mailbox in contoso. Run Move-Mailbox cmdlet.
D. Create a shared mailbox for each mailbox in contoso. Run the New-MoveRequest cmdlet.
Answer: B

Microsoft   070-662 examen   certification 070-662

NO.12 You have an Exchange Server 2010 Service Pack 1 (SP1) organization named fabrikam.com A partner
company has an Exchange Server 2010 Service Pack 1 (SP1) organization named contoso.com. You
plan to implement federated delegation between fabrikam.com and contoso.com. You need to identify
which DNS records must be created to support federated delegation. Which DNS records should you
identify? (Choose all that apply.)
A. Host (A)
B. Mail exchanger (MX)
C. Host information (HINFO)
D. Text (TXT)
E. Mail group (MG)
Answer: AD

Microsoft examen   070-662   070-662   070-662   070-662 examen

NO.13 Your network contains an Active Directory domain named contoso.com. You have an Exchange Server
2010 Service Pack 1 (SP1) organization. External users access their email by Outlook Web Apps. On you
need to ensure that the external users can log on to Outlook Web App without specifying a domain name.
Which cmdlet should you use?
A. Set-OrganizationConfig
B. Set-OwaVirtualDirectory
C. New-OrganizationRelationShip
D. New-OwaMailboxPolicy
Answer: B

Microsoft   certification 070-662   070-662 examen   certification 070-662   certification 070-662   070-662 examen

NO.14 You have an Exchange organization. All servers in the organization have Exchange Server 2010
SP1installed.The organization contains a distribution group named Group1.You need to ensure that a
user named User1 can review and approve all messages sent to Group1.What should you do?
A. Modify the Managed By list for Group1.
B. Create a new journal rule and specify user1 as the journal recipient.
C. Modify the mail flow settings for User1.
D. Modify the mail flow settings for Group1.
Answer: D

certification Microsoft   070-662   070-662

NO.15 You have an Exchange Server 2010 Service Pack1 (SP1) organization. The organization contains the
servers configured as shown in the following table
The Mailbox servers are members of a database availability group (DAG) named DAG1.The organization
also has a load balancing solution for Client Access. The load balancing solution has a
virtual IP address that is available by using the mail.contoso.com host name.
You create a new Client Access array that uses the outlook.contoso.com fully qualified name (FQFN)
You need to ensure that all users connect to outlook.contoso.com from Microsoft Outlook 2010.
Which Windows Powershell should you run
A. Set-MailbxDatabaseCopy
B. New-DatabaseAvailabilityGroup
C. Set-MailboxServer
D. Set-ClientAccessServer
E. New-PublicMailboxDatabase
F. New-PublicFolderDatabase
G. Set-ClientAccessArray
H. Add-MailboxDatabaseCopy
I. Set-DatabaseAvailabilityGroup
J. Set-PublicFolderDatabae
K. Add-RoleGroupMember
L. Add-DatabaseAvailabilityGroupServer
M. Set-MailboxDatabase
Answer: M

Microsoft examen   070-662   070-662 examen   070-662 examen

NO.16 Your company has two offices. Each office is configured as an Active Directory site. The offices connect
to each other by using a congested WAN link. Each office has a direct, high-speed connection to the
Internet. Each site contains two Exchange Server 2010 Service Pack 1 (SP1) Hub Transport servers. You
need to ensure that email messages sent to the Internet from the Exchange organization are neverrouted
over the WAN link.
What should you do from each site?
A. From the Exchange Management Shell, run the Set-TransportConfig crndlet
B. From the Exchange Management Console (EMC), modify the properties of the accepted domain
C. From the Exchange Management Shell, run the Set-SendConnector cmdlet
D. From the Exchange Management Console (EMC), modify the properties of the Receive connector
E. From the Exchange Management Console (EMC), modify the properties of the Send connector
F. From the Exchange Management Console (EMC), modify the properties of the remote domain
G. From the Exchange Management Shell, run the Set-ForeignConnector cmdlet
H. From the Exchange Management Shell, run the Set-TransportAgent cmdlet
Answer: C

Microsoft examen   070-662   070-662   070-662   070-662

NO.17 You have an Exchange organization. All servers in the organization have Exchange Server 2010 SP1
installed.
You need to ensure that each user who sends a meeting request to a room mailbox receives a custom
message from the mailbox.
What should you do from the properties of the mailbox?
A. Configure the Mailbox Features settings.
B. Configure the Mail Flow settings.
C. Enable the Resource Booking Attendant.
D. Configure the Resource Information settings.
E. Configure the Resource In-Policy Requests settings.
F. Configure the Resource Out-of-policy Requests settings.
G. Configure the Account settings.
H. Configure the Resource Policy settings.
Answer: D

Microsoft   070-662   070-662 examen   certification 070-662

NO.18 You have an Exchange Server 2010 Service Pack 1 (SP1) Mailbox server named Server1.You need to
ensure that a copy of each email message modified or deleted by a user named User1 isretained on
Server1.
What should you do?
A. Create a personal tag.
B. Enable single item recovery.
C. Enable message tracking
D. Enable a litigation hold
E. Create a retention policy
F. Create a journal rule
Answer: D

Microsoft   certification 070-662   070-662 examen   certification 070-662

NO.19 You are a network administrator for a company named Contoso, Ltd. Contoso has an Exchange Server
2010 Service Pack 1 (SP1) organization named contoso.com. The organization contains the following
Exchange servers: -Two Hub Transport servers -Two Edge Transport servers that have Edge
Subscriptions Contoso merges with another company named Fabrikam, Inc. Fabrikam has an Exchange
Server 2010 SP1 organization that uses the fabrikam.com SMTP domain.
All mail exchange (MX) records for fabrikam.com point to the contoso.com Edge Transport servers.
You deploy a solution for Contoso to journal all email messages by using Hub Transport rules.
You need to ensure that all email messages received by fabrikam.com users from the Internet are
journaled by the contoso.com Exchange organization.
What should you do?
A. From the Exchange Management Shell, run the new-accepteddornain -domaintypeinternalrelay
command.
B. From the Exchange Management Shell, run the new-sendconnector -addressspaces fabrikam.com
command.
C. From the Exchange Management Console (EMC), create an accepted domain that uses the
authoritative domain type.
D. From the Exchange Management Shell, run the new-receiveconnector -partner command.
E. From the Exchange Management Shell, run the new-accepteddornain -domaintypeexternalrelay
command.
F. From the Exchange Management Console (EMC), create an accepted domain that uses the internal
relay domain type.
Answer: C

certification Microsoft   certification 070-662   070-662 examen   070-662   070-662   070-662 examen

NO.20 The network contains an Active Directory domain. The domain contains one site.
You have an Exchange Server 2010 Service Pack 1 (SP1) organization that contains two Client Access
servers, two Hub Transport servers, and users report that they fail to receive email messages from the
Internet.
You review the message tracking logs and discover that the organization failed to receive any email
messages from the Internet during the past hour.
You need to identify what is prevening the hub Transport servers from receiving email messages.
What should run from the Exchange Management Shell?
A. Test-WebServicesConnectivity
B. Test-MailFlow
C. Get-MailboxDatabase
D. Test-MapiConnectivity
E. Test-ReplicationHealth
F. Test-AvailabilityService
G. Get-SenderIdConfig
H. Test-SMTPConnectivity
I. Checkdatabaseseredundancy.ps1
J. Retry-Queue
K. Test-SenderID
L. Get-MailboxDatabaseCopyStatus
M. Test-SystemHealth
N. Test-OutlookWebServices
Answer: H

certification Microsoft   070-662   certification 070-662   070-662   070-662 examen

Le test Microsoft 070-662 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.

070-663 dernières questions d'examen certification Microsoft et réponses publiés

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Microsoft 070-663. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Microsoft 070-663 est une bonne examination. Mais c'est difficile à passer le test Microsoft 070-663. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.

C'est sûr que le Certificat Microsoft 070-663 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Microsoft 070-663, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Microsoft 070-663 peut bien tester la professionnalité de IT.

Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification Microsoft 070-663. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test Microsoft 070-663. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Microsoft 070-663 et passer le test à la première fois.

Code d'Examen: 070-663
Nom d'Examen: Microsoft (Pro: Designing and Deploying Messaging Solutions with Microsoft Exchange Server 2010)
Questions et réponses: 275 Q&As

070-663 Démo gratuit à télécharger: http://www.pass4test.fr/070-663.html

NO.1 Your network consists of an Active Directory domain that contains the domain controllers shown in the
following table.
You plan to deploy an Exchange Server 2010 server in each site.
You need to recommend changes to the domain controllers to support the installation of Exchange Server
2010.
What should you do?
A.Enable Server2 as a global catalog server.
B.Enable Server3 as a global catalog server.
C.Reinstall Server2 to Windows Server 2008 SP2 (x64).
D.Reinstall Server3 to Windows Server 2008 SP2 (x64).
Answer: A

Microsoft   070-663 examen   certification 070-663   certification 070-663   certification 070-663

NO.2 Contoso, Ltd.has an Exchange Server 2010 environment that accepts email for the contoso.com email
domain.Fabrikam, Inc.has an Exchange Server 2010 environment that accepts mail for the fabrikam.com
email domain.
Contoso acquires Fabrikam and establishes an internal network connection between the two
companies.After the acquisition, only the Contoso Exchange Server environment accepts external
email.You have the following requirements:
Retain existing fabrikam.com email addresses.
Enable users in both Exchange Server environments to receive mail at contoso.com email addresses.
You need to recommend a solution that meets the requirements.
Which two actions should you recommend? (Each correct answer presents part of the solution.Choose
two.)
A.Create an internal send connector.
B.Create an internal receive connector.
C.Create an internal relay accepted domain for contoso.com.
D.Create an external relay accepted domain for contoso.com.
Answer: AC

Microsoft examen   070-663   certification 070-663   070-663 examen

NO.3 A corporate environment will include client computers that run Microsoft Outlook 2010.Email services
will be provided to some users by a cloud-based Exchange Server 2010 SP1 service provider and to
other users by an on-premise deployment of Exchange Server 2010 SP1.
You need to recommend a solution that will allow users in the cloud-based environment to receive internal
Out of Office replies from users in the on-premise environment.
What should you recommend?
A.Create a transport rule.
B.Create a remote domain.
C.Create an accepted domain.
D.Create an organization relationship.
Answer: B

Microsoft examen   070-663   070-663

NO.4 Your company has a main office and 10 branch offices.Each office has a direct link to the Internet.Each
branch office has a WAN link that connects to the main office.
Your network consists of an Active Directory forest.Each office is configured as an Active Directory site.
You plan to deploy an Exchange Server 2010 Hub Transport server in each site.
You need to design a message routing solution to meet the following requirements:
Branch office connections to the Internet must be used to deliver e-mail
Branch office servers must use the WAN link to the main office to deliver e-mail to other branch offices
Branch office servers must be prevented from sending e-mail to the Internet by using the WAN link to the
main office
The solution must minimize administrative overhead
What should you include in the solution?
A.one Send connector for each site
B.one SMTP site link for each site
C.two Send connectors for each site
D.10 Send connectors for each site
Answer: A

Microsoft examen   070-663 examen   certification 070-663   070-663   070-663

NO.5 You are designing an Exchange organization for a company named Contoso, Ltd.All servers in the
organization will have Exchange Server 2010 Service Pack 1 (SP1) installed.
Contoso has a partner company named Fabrikam, Inc.Fabrikam has an Exchange organization that
contains only Exchange Server 2010 SP1 servers.
You plan to configure a federation trust between Fabrikam and Contoso.
You need to recommend a certificate for the federation trust.
Which of the following certificates is the best recommendation? (More than one answer choice may
achieve the goal.Select the BEST answer.)
A.a certificate from a third-party certification authority (CA)
B.a certificate from an internal certification authority (CA)
C.the self-signed certificate automatically generated by the Exchange 2010 Setup wizard
D.the self-signed certificate automatically generated by the New Federation Trust wizard
Answer: D

Microsoft examen   certification 070-663   070-663 examen   certification 070-663

NO.6 Your company has three offices.Each office has a direct link to the Internet.The offices connect to each
other by using a WAN link.
Your network consists of an Active Directory forest that contains two domains and one site.The functional
level of the forest is Windows Server 2003.All domain controllers run Windows Server 2003 R2.Each
office contains two domain controllers for each domain.All domain controllers are global catalog servers.
In each office, you plan to deploy Mailbox, Client Access, and Hub Transport Exchange Server 2010
servers.All e-mail messages sent to the Internet will be delivered from a local server in each office.
You need to recommend changes to the Active Directory environment to support the planned deployment
of Exchange Server 2010.
What should you recommend?
A.Disable site link bridging for the forest.
B.Modify the cost values for the default IP site link.
C.Create a separate Active Directory subnet and site object for each office.
D.Upgrade one domain controller in each office to Windows Server 2008.
Answer: C

Microsoft   certification 070-663   certification 070-663

NO.7 A corporate environment will include Exchange Server 2010.
You are planning capacity for the Mailbox servers.You require 800 GB of disk space for mailbox content.
You need to recommend the minimum amount of additional space required for content indexing.
What should you recommend?
A.80 GB
B.96 GB
C.120 GB
D.160 GB
Answer: A

Microsoft   certification 070-663   070-663   certification 070-663   070-663 examen

NO.8 You have an Exchange organization.All servers in the organization have Exchange Server 2010
Service Pack 1 (SP1) installed.The organization contains the servers configured as shown in the following
table.
Server name
Server role
Edge1
Edge Transport
Edge2
Edge Transport
Hub1
Hub Transport
Hub2
Hub Transport
CAS1
Client Access
CAS2
Client Access
MBX1
Mailbox
MBX2
Mailbox
You plan to deploy a line-of-business application named App1.App1 will have a built-in SMTP service that
will send e-mail messages to users in the Exchange organization.
You need to recommend a message routing solution that meets the following requirements:
Ensures that App1 can send e-mail messages to internal users.
Prevents other servers on the internal network from sending e-mail messages to internal users.
Ensures that each e-mail message received by the Exchange organization is scanned for viruses.
You install Microsoft Forefront Protection 2010 for Exchange Server on both Edge Transport servers.
Which of the following solutions is the best recommendation? (More than one answer choice may achieve
the goal.Select the BEST answer.)
A.On Hub1, install Forefront Protection 2010 for Exchange Server.
On Hub1, create a new internal Receive connector, and then configure the Remote Network settings to
include the IP address of App1.
On the server that hosts App1, configure the SMTP service to relay e-mail directly to Hub1.
B.From the properties of the default Receive connector on Edge1, configure the Remote Network settings
to include the IP address of App1, and then add the Anonymous users permission group to the Receive
connector.
On the server that hosts App1, configure the SMTP service to relay e-mail to Edge1.
C.On Hub1, install Forefront Protection 2010 for Exchange Server.
On Hub1, add the Anonymous users permission group to the default Receive connector.
On an internal DNS server, create a Mail Exchanger (MX) record that points to Hub1.
On the server that hosts App1, configure the SMTP service to relay e-mail by using DNS name resolution.
D.On Edge1, create a new internal Receive connector.
From the properties of the new Receive connector, configure the Remote Network settings to include the
IP address of App1, and then add the Anonymous users permission group to the Receive connector.
From the properties of the default internal Receive connector on Edge1, exclude the IP addresses of the
internal network.
On the server that hosts App1, configure the SMTP service to relay e-mail to Edge1.
Answer: D

Microsoft   070-663 examen   070-663   070-663   070-663

NO.9 You have an Exchange Server 2010 organization.
Your company acquires another company that has an Exchange Server 2010 organization.
You need to recommend a solution for the Exchange Server 2010 organization to meet the following
requirements:
All users must be able to view the global address lists ( GALs ) for both organizations
All users must be able to view free/busy information for users in both organizations
What should you include in the solution?
A.Implement Active Directory Federation Services (AD FS) Run the Microsoft Exchange
Inter-Organization Replication tool
B.Implement Microsoft Identity Lifecycle Manager (ILM) 2007
Create a two-way cross-forest trust between both organizations
C.Create a federation trust between both organizations
Implement Microsoft Identity Lifecycle Manager (ILM) 2007
Run the New Organization Relationship wizard
D.Create a two-way cross-forest trust between both organizations
Implement Active Directory Federation Services (AD FS)Run the Microsoft Exchange Inter-Organization
Replication tool
Answer: C

certification Microsoft   070-663 examen   certification 070-663   070-663 examen

NO.10 A corporate environment will include Exchange Server 2010.
You are designing a deployment plan for the Mailbox servers.
You need to recommend the minimum amount of physical memory that supports the following
requirements:
Use single-role Mailbox servers.
Each Mailbox server must support 22.5 GB of database cache.
How much memory should you recommend?
A.24 GB
B.32 GB
C.48 GB
D.64 GB
Answer: B

certification Microsoft   070-663   070-663   070-663   070-663   certification 070-663

NO.11 You are the enterprise administrator for an Exchange Server 2010 organization.All users run Microsoft
Office Outlook 2010.
You are designing a sharing solution for your organization and a partner organization.The partner
organization also uses Exchange Server 2010.
You need to recommend a strategy for sharing information with the partner organization to meet the
following requirements:
Provide cross-organizational access to user contacts
Provide cross-organizational access to free\busy information
What should you recommend?
A.Creating cross-forest trusts
B.Implementing Federated Delegation
C.Implementing Microsoft Identify Lifecycle Manager (ILM) 2007
D.Running the Microsoft Exchange Inter-Organization Replication tool
Answer: B

Microsoft   070-663   070-663   certification 070-663

NO.12 A corporate environment will include Exchange Server 2010 in a single Active Directory Domain
Services (AD DS) domain.The AD DS site topology is configured as shown in the exhibit.(Click the Exhibit
button.)You are designing the Exchange Server deployment plan.You have the following requirements:
Deploy Exchange Server 2010 servers in two AD DS sites.
Maximize the security of the Exchange Server deployment.
You need to recommend a solution that meets the requirements.
Which two actions should you recommend? (Each correct answer presents part of the solution.Choose
two.)
A.Configure DC2 as a read-only global catalog server.
B.Configure DC3 as a writable global catalog server.
C.Deploy a Mailbox server, a Hub Transport server, and a Client Access server in Site A and in Site B.
D.Deploy a Mailbox server, a Hub Transport server, and a Client Access server in Site A and in Site C.
Answer: BD

Microsoft   070-663   070-663 examen   certification 070-663

NO.13 A corporate environment will include Exchange Server 2010 in a single Active Directory Domain
Services (AD DS) domain.The primary DNS suffix of the domain controllers is not the same as the DNS
domain name.
You are designing the Exchange Server 2010 deployment plan.
You need to recommend a solution that allows Exchange Server 2010 servers to access the domain
controllers.
What should you recommend?
A.Modify the DNS-Host-Name AD DS attribute on the domain object container.
B.Modify the NETBIOS-Name AD DS attribute on the Exchange Server computer objects.
C.Modify the msDS-AllowedDNSSuffixes AD DS attribute on the domain object container.
D.Modify the msDS-AdditionalDnsHostName AD DS attribute on the domain object container.
Answer: C

certification Microsoft   070-663   070-663 examen

NO.14 A corporate environment includes a main office and a branch office.
The company plans to deploy Exchange Server 2010.The Mailbox servers will be part of a single
database availability group (DAG) that spans both locations.There is only intermittent connectivity
between the two locations.
You need to recommend a public folder database solution that enables users from either location to
consistently access public folders.
Which two actions should you recommend? (Each correct answer presents part of the solution.Choose
two.)
A.Configure cross-site RPC Client Access on the DAG.
B.Configure public folder referrals between the main office and the branch office.
C.Create a single public folder database in the main office and add it as a replica for the public folders.
D.Create a single public folder database in the branch office and add it as a replica for the public folders.
Answer: CD

Microsoft   070-663 examen   certification 070-663   070-663 examen   070-663 examen

NO.15 You have an Exchange Server 2010 Hub Transport server named Hub1.
You install an application on a third-party server named Server1.
You discover that the application cannot authenticate to remote servers.
You need to ensure that the application can relay e-mail messages by using Hub1.
What should you do?
A.Create a new Send connector
Add the TCP/IP address of Server1 to the Send connector
Modify the permissions for the Send connector
B.Create a new Receive connector
Add the TCP/IP address of Server1 to the Receive connector
Modify the permissions for the Receive connector
C.Add the TCP/IP address of Server1 to the default Receive connector
Create a message classification
Create a transport rule
D.Add the TCP/IP address of Server1 to the Client Receive connector
Create a remote domain
Create a transport rule
Answer: B

certification Microsoft   070-663   certification 070-663   070-663

NO.16 A company named Contoso, Ltd.has offices in Montreal, Seattle, and Denver.An Active Directory site
exists for each office.Only the Montreal site is connected to the Internet.
You are designing an Exchange organization for Contoso.All servers in the organization will have
Exchange Server 2010 Service Pack 1 (SP1) installed.
Each office will contain two Exchange servers that each has the Mailbox, Hub Transport, and Client
Access server roles installed.
You need to recommend a deployment solution for the Client Access servers.
Which of the following solutions is the best recommendation? (More than one answer choice may achieve
the goal.Select the BEST answer.)
A.one Client Access server array in each office
round-robin DNS in each office
B.a load balancing solution in each office
round-robin DNS in the Montreal office
C.one Client Access server array in each office
a load balancing solution in each office
D.one Client Access server array that contains all of the Client Access servers
a load balancing solution in the Montreal office
Answer: C

certification Microsoft   070-663 examen   070-663   070-663

NO.17 You have an Exchange Server 2003 organization.All servers have 32-bit hardware.
You plan to transition to Exchange Server 2010 and deploy new Mailbox servers.
You need to evaluate the current servers to provide recommendations for the deployment of the new
Mailbox servers.
What should you include in the evaluation?
A.number of concurrent connections to Outlook Web Access
number of mailbox databases
memory utilization
B.number of concurrent connections to Outlook Web Access
RPC latency
disk I/O latency
C.number of concurrent MAPI connections
size of mailbox databases
number of mailboxes
D.number of mailboxes
disk I/O latency
RPC latency
Answer: C

Microsoft   certification 070-663   070-663   certification 070-663   070-663   070-663

NO.18 A corporate environment includes an on-premise deployment of Exchange Server 2010 SP1.
The company needs to share calendar availability information with a partner.The partner is using a
cloud-based Exchange Server 2010 SP1 service.
You need to recommend a solution for sharing calendar availability information for all employees with the
partner.
What should you recommend?
A.Create a federation trust and a TXT DNS record.Then create an organization relationship with the
partner.
B.Create a federation trust and a CNAME DNS record.Then create an organization relationship with the
partner.
C. Add the partner s domain as an accepted domain.Then create a TXT DNS record and a transport
rule.
D. Add the partner s domain as an accepted domain.Then create a CNAME DNS record and a group
policy for all users.
Answer: A

Microsoft   certification 070-663   certification 070-663   070-663   certification 070-663   070-663

NO.19 A corporate environment includes an on-premise deployment of Exchange Server 2010 SP1 and an
Active Directory Domain Services (AD DS) domain.
The company plans to move some users to a cloud-based Exchange Server 2010 SP1 environment.The
migration process must meet the following requirements:
Integrate the on-premise environment with the cloud-based environment.
Migrate all existing mailbox items.
Authenticate all users by using their AD DS credentials.
Share calendar availability information among all users.
You need to recommend a tool for gathering information and verifying that the requirements can be met.
Which tool should you recommend?
A.Exchange Best Practices Analyzer
B.Exchange Deployment Assistant
C.Exchange Pre-Deployment Analyzer
D.Exchange Remote Connectivity Analyzer
Answer: B

Microsoft   certification 070-663   070-663   certification 070-663

NO.20 You have a main office and five branch offices.The offices connect to each other by using a WAN link.
An Active Directory site exists for each office.Each site has a separate IP site link to all other sites.The
main office site is configured as a hub site.
You have an Exchange Server 2010 organization.
You discover that messages sent between offices are not routed through the Hub Transport servers in the
main office.
You need to ensure that all messages sent between offices are routed through the Hub Transport servers
in the main office.
What should you do?
A.Change all IP site links to SMTP site links.
B.Modify the Exchange-specific cost for each site link.
C.From the Hub Transport servers in each site, create a journal rule.
D.From the Hub Transport servers in each site, create a transport rule.
Answer: B

Microsoft examen   certification 070-663   070-663

Il y a plusieurs de façons pour réussir le test Microsoft 070-663, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.

Pass4Test offre une formation sur Microsoft 70-576 matériaux examen

Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test Microsoft 70-576 à la première fois.

Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.

Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.

Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Microsoft 70-576 est une bonne examination. Mais c'est difficile à passer le test Microsoft 70-576. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.

Code d'Examen: 70-576
Nom d'Examen: Microsoft (Designing and Developing Microsoft SharePoint 2010 Applications)
Questions et réponses: 172 Q&As

70-576 Démo gratuit à télécharger: http://www.pass4test.fr/70-576.html

NO.1 You need to specify the correct artifacts to use in a SharePoint 2010 application for a school district.
The school district ¯ s ad m i n i s tr a t o r needs t o be ab l e t o sea r ch f o
student information on an intranet
SharePoint 2010 portal.
Student information is currently available in another database, which supports an Open Database
Connectivity(ODBC) driver. You need to design the solution to meet the following requirements:
Provide a user interface to search for a student based on name.
.Enable the administrator to select the correct student name from the search results.
.Provide a student header section that displays the primary student identity information, which will enable
the administrator to correlate any new information with the correct student.
.Provide additional data entry pages to add or update additional student information.
Which approach should you recommend?
A. Design HTML Web pages to render the student details. Install these pages under the
/templates/_layouts/1033 folder and load these pages in Web Parts.
B. Design connected Web Parts to share information among search data entry, student header
information, and new data entry information Web Parts.
C. Design a user control and load this control in a Web Part to search for a student. Then render the
student details in a SharePoint page.
D. Design a Web Part to search for a student. Then render the student record details in a SharePoint
page.
Answer: B

Microsoft   70-576 examen   certification 70-576   70-576 examen

NO.2 A SharePoint 2010 server farm has a custom feature installed that provides specialized business logic
for a SharePoint solution package. The solution package is being updated to include additional
functionality. Your job is to specify a deployment method for the updates that will:
Add the additional application business logic to the solution package.
.Provide the least downtime for the application.
.Automate the application upgrade a much as possible.
You need to update the solution package with additional business logic and meet all these requirements.
Which
approach should you recommend?
A. Create a new feature containing the new business logic. Use the feature upgrade process to deploy the
solution package by incrementing the version number of the feature in the Feature.xml file.
B. Add the new business logic to the existing feature. Use the feature upgrade process to deploy the
solution package by incrementing the version number of the feature in the Feature.xml file.
C. Use Visual Studio 2010 to add the new business logic to the existing code in the .wsp package for the
feature.
Create two timer jobs - one to retract the current solution package and one to deploy the solution package
with the updated feature.
D. Use the object model to create a custom feature receiver to increment the version property of the
SPFeatureDefinition class. Increment the version number of the current solution in the Feature.xml file.
Answer: B

certification Microsoft   70-576   certification 70-576   certification 70-576   70-576

NO.3 You are designing an asset management solution using SharePoint 2010. You need to design a
solution that meets the following requirements:
Binary large objects (BLOBs) cannot be stored in Microsoft SQL Server.
.There can be no custom development or third-party products.
Which approach should you recommend?
A. Install and configure Remote BLOB Storage and enable the content databases to use Remote BLOB
Storage.
B. Install and configure Remote BLOB Storage and enable the configuration databases to use Remote
BLOB Storage.
C. Install and configure an external BLOB store provider and enable the content databases to use the
external BLOB store provider.
D. Install and configure an external BLOB store provider and enable the configuration databases to use
the external BLOB store provider.
Answer: A

Microsoft   70-576   certification 70-576   70-576 examen   70-576

NO.4 You are designing a SharePoint 2010 solution. You need to design the solution to meet the following
requirements:
All sites must have a consistent structure when initially created.
.All sites must include a document library that contains Word documents with searchable properties.
.Site users must be able to generate a spreadsheet detailing the properties of the document library
contents.
Which approach should you recommend?
A. Create a feature to create the required site structure programmatically. Create a content type for the
document library. Create a custom workflow for the document library to allow users to generate the
spreadsheet.
B. Create a feature to create the required site structure programmatically. Use feature stapling to
associate the feature with all site definitions. Create a custom action for the standard document library to
allow users to generate the spreadsheet.
C. Create a custom site definition for the sites and allow only that site definition to be used. Create a
content type for the document library. Create a custom action for the document library to allow users to
generate the spreadsheet.
D. Create a custom site definition for the sites and allow only that site definition to be used. Create a
content type for the document library. Create a custom event receiver to allow users to generate the
spreadsheet.
Answer: C

Microsoft   70-576   70-576

NO.5 You are designing a SharePoint 2010 application that stores information about each machine in a
factory. This information includes an inventory of parts, the machine ¯ s m a i n t enance h i s t o ry , and a
document library of repair manuals for each machine in Microsoft Word format. The application must:
Establish links between the factory machine data, the machine part inventory, the maintenance history,
and the repair manuals to allow the display of additional fields from the other lists.
.Enforce relational integrity between the data to create custom views for various business users.
.Allow nontechnical users to update the individual list data and views, as well as to update the manuals.
.Enforce relationships that allow cascade deletes of items from the machine parts list when items are
deleted from the machine list, but prevent data in the machine parts list from being orphaned. You need to
design a data access plan that meets all these requirements and allows all data to be managed within the
SharePoint 2010 system.
Which plan should you recommend?
A. Create tables in Microsoft SQL Server for each set of inventories. Create relationships with primary and
foreign keys linking the tables. Use Business Connectivity Services (BCS) to connect SharePoint 2010
lists to these tables to manage the data.
B. Create tables in Microsoft SQL Server for each set of inventories. Create relationships with primary and
foreign keys linking the tables. Store machine part manuals in a Share Point document library and use
event receivers to synchronize data in the lists and libraries.
C. Use SharePoint 2010 lists and document libraries to store data. Create relationships using lookup
fields and relationship joins between the lists and document libraries.
D. Use SharePoint 2010 lists and document libraries to store data. Create a custom workflow to update
information in the lists and document libraries.
Answer: C

Microsoft   70-576   70-576 examen   certification 70-576   70-576

NO.6 You are using Business Connectivity Services to design a SharePoint 2010 application that connects to
an external database.The database users have accounts for authentication that are different from their
Active Directory accounts. You have a requirement to allow users to connect to the external database
without prompting
the user for credentials. You need to store user credentials and use these credentials when connecting to
the external database. Which approach should you recommend?
A. Create a target application that uses the Microsoft Single Sign-On Service. Select the Connect with
Impersonated Custom Identity option when creating the connection to the database.
B. Create a target application that uses the Secure Store Service. Select the Connect with Impersonated
Custom Identity option when creating the connection to the database.
C. Create a target application that uses the Single Sign-On Service. Select the Connect with User ¯ s
Identity option when creating the connection to the database.
D. Create a target application that uses the Secure Store Service. Select the Connect with User ¯ s I den tit y
option when creating the connection to the database.
Answer: B

Microsoft   70-576 examen   70-576   certification 70-576

NO.7 You are helping an organization ¯ s execu ti ve t ea m t o des i gn an au t o m a t d approval process to
standardize certain documents. You have the following requirements:
The documents must be reviewed and approved by multiple teams in the approval chain.
.Each reviewer must provide feedback as part of completing a review.
.Each reviewer must either approve or reject the documents.
.After review, the document status must be changed; an e-mail must be generated to the document author
and the next reviewer in the approval chain; and a task should be created for the next reviewer in the
approval chain.
You must design a custom workflow solution for the document approval process on a SharePoint 2010
site. What should the solution include?
A. An initiation form to collect the reviewer ¯ s f eedback and a S i m p l e ac ti v it y t o app r ove and r e j ec t t e
document
B. An association form to collect the reviewer ¯ s f eedback and a C o m pos it e ac ti v it y t o suppo rt cond iti ona l
activities such as approval and rejection
C. A task form to collect the reviewer ¯ s f eedback and a C o m pos it e ac ti v it y t o suppo rt cond iti ona
activities
such as approval and rejection
D. A task form to collect the reviewer ¯ s f eedback and a S i m p l e ac ti v it y t o app r ove and r e j ec t t he docu m en
Answer: C

Microsoft   70-576   70-576 examen   70-576 examen

NO.8 You are designing a solution that includes a custom list on a SharePoint 2010 site. You need to design
the solution to meet the following requirements:
The solution needs to add customized files to the site as part of the list provisioning.
.The list should only be provisioned in the sites of the site collection where it is specifically needed.
.The files must no longer remain provisioned in the site if the custom list is removed.
Which approach should you take?
A. Design a custom list. Implement list event receivers to add the custom files to the bin directory of the
Web application.
B. Design a custom feature solution. Implement feature event receivers on the Activate action to add files
to the site.
C. Design a custom feature solution. Implement feature event receivers on these two actions:
Install action to add files
Uninstall action to delete the files that were added during installation of the feature
D. Design a custom feature solution. Implement feature event receivers on these two actions:
Activate action to add the files
Deactivate action to delete the files that were added during activation of the feature
Answer: D

Microsoft   certification 70-576   70-576   70-576 examen   70-576 examen

NO.9 You are designing an external binary large object (BLOB) store provider by implementing the ISP
External Binary Provider interface. The farm has existing sites that contain content. Your implementation
has been verified to be working correctly. You need to ensure that content within existing sites is moved
using the external BLOB store provider.
You also must ensure that the solution does not require further custom coding. Which approach should
you recommend?
A. Perform a backup and restore on each site.
B. Perform a backup and restore of each content database.
C. Perform a backup and restore on each site collection.
D. Perform a backup and restore of the configuration database.
Answer: C

Microsoft   70-576 examen   70-576

NO.10 You are designing a SharePoint 2010 solution that allows users to enter address information for
contacts into a list named Address. You have the following requirements:
Ensure that users enter full nine-digit zip codes for the address information.
.Display a custom message indicating that a zip code is invalid if the entered zip code does not match the
full nine-digit requirements. You need to ensure that the application is designed to meet these
requirements.
Which approach should you recommend?
A. Create a custom command.
B. Create a Datasheet view on the Address list.
C. Use the Form Options of the Address list.
D. Create a formula on the column.
Answer: D

Microsoft examen   70-576   70-576 examen   70-576 examen   70-576

NO.11 You are designing a SharePoint 2010 solution that stores employee information in a list named
Employees and company information in a list named Company. Each company has one or more
employees. You need to recommend that a developer add a new column so that a one-to-many
relationship is created between the Company list and Employees list. Which approach should you
recommend?
A. Add an External Data column on the Employees list.
B. Add a Lookup column on the Employees list.
C. Add a Managed Metadata column on the Company list.
D. Add a Lookup column on the Company list.
Answer: B

Microsoft examen   certification 70-576   70-576   70-576   certification 70-576

NO.12 You are designing a SharePoint 2010 application to store 50 GB of digital assets, including audio and
video files that are up to 20 MB in size. You have the following requirements:
The disk storage system must use standard hard drives and must be configured to optimize read
performance.
.The SharePoint 2010 database uses Microsoft SQL Server Express 2008.
.The application must leverage standard SharePoint 2010 components to limit the requirement for custom
development.
You need to design a storage solution that meets all of these requirements. Which approach should you
recommend?
A. Enable FILESTREAM storage for a Microsoft SQL Server Express 2008 database on a RAID 0 disk
system.
Then install and configure remote Binary Large Object (BLOB) storage in SharePoint 2010.
B. Store the assets directly in Microsoft SQL Server Express 2008 and create multiple content databases
on a RAID 0 disk system.
C. Install and configure support for external BLOB storage for SharePoint 2010 and use the
ISPExternalBinaryProvider interface to manage files on a RAID 0 disk system.
D. Install and configure support for external BLOB storage for SharePoint 2010 and configure a Microsoft
SQL
Server Express 2008 database to store BLOBs on a RAID 5 disk system.
Answer: A

certification Microsoft   70-576   70-576   70-576

NO.13 You are designing a SharePoint 2010 solution to manage statements of work. You need to design the
solution according to the following requirements:
Store the customer ID, purchase order number, estimated completion date, and other fields associated
with specific documents as they are uploaded.
.The information must be created so that it can be set within the Microsoft Word document information
panel.
.Programmatically execute a series of tasks, including assigning tasks to validate the information and
creating team sites, based on information related to each document.
.These tasks must run to completion, even if the server is rebooted.
Which approach should you recommend?
A. Create a document library for a custom content type that contains site columns for the document
information.
Develop a SharePoint workflow for the document library to execute the document tasks.
B. Create a document library for a custom content type that contains site columns for the document
information.
Develop an event receiver for the document library to execute the document tasks.
C. Create a custom list with fields to store the additional items and an attached document. Develop a
SharePoint workflow for the custom list to execute the additional tasks.
D. Create a custom list with fields to store the additional items and an attached document. Develop an
event receiver for the custom list to execute the additional tasks.
Answer: A

Microsoft examen   70-576 examen   70-576   70-576

NO.14 You are designing a SharePoint 2010 solution for a large sales force. You have the following
requirements:
Each sales region must have its own site within the solution with lists to track the current sales data of the
sales executives.
.These lists must contain information about the status of sales opportunities, the estimated price, the
expected close date, and contact information for the potential sale.
.The welcome page for the root site must display a current summary for all regions, including the
percentage of sales expected to close within the next month and total expected revenue over time. You
need to design the solution to meet all these requirements. What approach should you recommend?
A. Create site columns from the Managed Metadata Services feature within Central Administration to
specify and display the sales information on the root site.
B. Create an event receiver for each list to copy the list data when an item is inserted into a list on the root
site.
Create a List View Web Part to display the sales information on the root site.
C. Create a content type for the metadata to be tracked. Use a Content Query Web Part to display the
sales information on the root site.
D. Create a custom workflow to manage the list item data and update properties on the Web Part to
display the sales information on the root site.
Answer: C

Microsoft   certification 70-576   70-576

NO.15 You are designing a custom SharePoint 2010 solution package. It will include a feature that contains a
Web Part,which requires a custom assembly for its functionality. You need to design the feature based on
the following requirements:
The Web Part must be a partial trust application and support a custom Code Access Security (CAS)
policy.
.The solution package must be deployed without the need of farm-level administrator permissions.
Which approach should you recommend?
A. Create the Web Part feature and deploy the required assembly to the bin directory of only the Web
applications that require it. Then delegate administration to the site administrator. Lastly, create a custom
CAS policy file and point to it the web.config file of the application.
B. Create the Web Part feature assembly with a strong name and deploy it using a .wsp file to the
_app_bin directory of all Web applications where it is needed. Then activate it using delegated
administration.
C. Create an assembly with a strong name and deploy it to the global assembly cache at the farm level.
Activate the feature at the site collection level with delegated administration.
D. Create the Web Part feature as a sandboxed solution.
Answer: D

certification Microsoft   70-576 examen   certification 70-576   70-576   70-576

NO.16 You are designing a SharePoint 2010 information architecture plan for a client that specifies the
mechanics of implementing content type change control. The requirements for the change control plan
specify that:
Site managers can create site-specific content types based on the content types in the parent site.
.Content types must not be overwritten when changes are made to parent site content types.
.Site managers can change child site content types.
You need to specify a content type change control plan that meets all these requirements. Which
approach should you recommend?
A. Direct the site manager to explicitly set the read-only property of the content type to true. Direct the site
collection manager to make the specified change required in the child site to the content type at the site
collection level.
B. Direct the site manager to explicitly set the read-only property of the content type to true. Perform a
push-down operation from the parent site to overwrite the required changes to the read-only content types
in all the child sites.
C. Define the content type as read-only at the child site level. Direct the site manager to explicitly set the
readonly property of the content type to false to make changes to the content type. Then change the
read-only property to true.
D. Define the content type as sealed. Direct the site manager to explicitly set the sealed property of the
content type to false to make changes to the content type. Then change the sealed property of the
content type to true.
Answer: C

Microsoft   70-576   70-576   certification 70-576

NO.17 You are designing a SharePoint 2010 feature. The feature includes a feature receiver that executes
code on activation and deactivation. The feature receiver code interacts with a Web service, which could
cause errors beyond your control. You need to ensure that the feature does not activate or deactivate if
the Web service causes an error.
Which approach should you recommend.?
A. Wrap your code in a try-catch block. Log the error and issue another request to the Web service in the
catch block.
B. Wrap your code in a try-catch block. Log the error and throw an exception in the catch block.
C. Wrap your code in a try-catch block. Only catch exceptions of type SPException.
D. Wrap your code in a try-finally block. Log any issues your code encounters in the finally block.
Answer: B

Microsoft   70-576   70-576 examen   certification 70-576

NO.18 You are designing a SharePoint 2010 site. You need to design the site to meet all the following
requirements:
Your business requires a consistent structure to manage sales proposal documents across all account
teams.
.The sales director must ensure that all sales documents conform to the same template.
.All sales proposals must be reviewed and approved by the sales manager.
.Every site must be created with a document library, a list of the account team members, and the account
status.
Which approach should you recommend?
A. Design a site template with a standard list of account team members and a shared document library to
hold the proposal documents.
B. Design a proposal content type to store proposal document metadata and a shared document library to
hold the proposal documents.
C. Design a proposal content type to include required metadata information about the proposal
documents. Also design a site template with a standard document library and account team members list
for consistency across all account teams.
D. Design a content type that uses a Microsoft Word template for proposal documents. The content type
includes required metadata. Also design a site template with a customized document library and list for
consistency across all account teams.
Answer: D

Microsoft   70-576 examen   70-576   70-576   70-576 examen

NO.19 You are designing a SharePoint 2010 application that includes a Task list. You have the following
requirements:
For each task, allow users to specify one of three values for an item named Phase using a drop-down
menu.
.Allow contributors to add new values for the Phase item. You need to design this application without
using custom code. Which approach should you recommend?
A. Create a Multiple lines of text field type on the Task list.
B. Create a Single line of text field type on the Task list.
C. Create a Choice field type on the Task list that gets values from a custom list.
D. Create a Lookup field type on the Task list that gets values from a custom list.
Answer: D

Microsoft   70-576   70-576 examen   certification 70-576

NO.20 You are designing a SharePoint 2010 application. You need to ensure that a custom list named Phone
Numbers is automatically created and added to the site whenever a new Team Site is created. Which
approach should you recommend?
A. Create a feature that defines a Phone Numbers list template. Then activate the feature on the team
site.
B. Create a feature that defines a Phone Numbers list template. Then use feature stapling to associate
the feature with the site definition of the team site.
C. Create the custom Phone Numbers List Template element and add the List Template element to the
onet.xml file of the team site.
D. Create the custom fields, views, and other specifications for the Phone Numbers list definition and add
them to the schema.xml file.
Answer: B

Microsoft   70-576 examen   70-576   70-576 examen

Il y a plusieurs de façons pour réussir le test Microsoft 70-576, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.

Pass4Test offre une formation sur Microsoft 70-668 matériaux examen

Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification Microsoft 70-668. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test Microsoft 70-668. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.

Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.

Pass4Test peut offrir la facilité aux candidats qui préparent le test Microsoft 70-668. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A Microsoft 70-668 selon le résumé de test réel Microsoft 70-668. Vous pouvez réussir le test à la première fois sans aucune doute.

Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test Microsoft 70-668 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test Microsoft 70-668.

Code d'Examen: 70-668
Nom d'Examen: Microsoft (PRO: Microsoft SharePoint 2010, Administrator)
Questions et réponses: 189 Q&As

Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Microsoft 70-668, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Microsoft 70-668. Peut-être d'obtenir le Certificat Microsoft 70-668 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.

70-668 Démo gratuit à télécharger: http://www.pass4test.fr/70-668.html

NO.1 You have two SharePoint Server 2010 server farms named Farm1 and Farm2. Farm1 is located in the
internal network. Farm1 hosts an authoring site collection that was created by using a publishing site
template. Farm2 is located in the perimeter network. Farm2 hosts a production site collection that was
created by using a publishing site template. A standard content deployment job is scheduled to run every
day to move content from Farm1 and Farm2.
You need to recommend a solution to ensure that users can immediately deploy content from Farm1 to
Farm2. The solution must use the minimum amount of administrative effort. What should you include in
the solution?
A. Site templates
B. Site definitions
C. Send To connections
D. A content deployment Quick Deploy job
Answer: D

Microsoft   70-668   certification 70-668

NO.2 You have multiple SharePoint Server 2010 server farms located in the following cities:
-Lisbon
-New York
-Auckland
You need to recommend a solution to aggregate all SharePoint application events. The solution must
minimize the amount of network traffic. What should you recommend?
A. Replicate the trace logs and the logging databases to a central location.
B. Implement Microsoft Systems Center Operations Manager.
C. Implement Microsoft SQL Server log shipping.
D. Configure usage and health data collection.
Answer: D

Microsoft   70-668   70-668 examen   70-668   70-668 examen

NO.3 Your company has an office in New York and an office in Seoul. The offices connect to each other by
usinga WAN link. The New York office contains all sales and marketing staff. The Seoul office contains
allmanufacturing and research staff. The network contains a single Active Directory domain. You plan to
deploy SharePoint Server 2010 to support both offices. You need to recommend a solution that meets the
following requirements:
-Network traffic across the WAN link must be minimized.-All documents must be stored on servers located
in the office where the documents were created.-SharePoint users in New York and Seoul must be able to
find documents in both offices when they perform searches.
What should you recommend?
A. A single server farm that uses two site collections and a Web server in each office
B. A single server farm that uses two content databases and Microsoft SQL Server database mirroring
between the two offices
C. A server farm in each office that has a Web server located in each office
D. A server farm in each office and a search federation between the farms
Answer: D

Microsoft   certification 70-668   certification 70-668   70-668   70-668

NO.4 You plan to implement SharePoint Server 2010 for your company's public Website. The site will display
information about the products that the company sells. You need to ensure that all the Web pages in the
site display the company logo at the top of the page and a copyright notice at the bottom of the page.
What should you implement?
A. Variations
B. Site templates
C. Page layouts
D. Master pages
Answer: D

Microsoft   70-668 examen   70-668 examen   70-668

NO.5 You plan to deploy a SharePoint Server 2010 server farm. The farm will contain a Web application for an
intranet site and a Web application for an extranet site.
The intranet will contain the following three content areas:
-Human resources
-Finance
-Operations The extranet will contain the following two content areas:
-Partners
-Customers
All content databases will be backed up by using Microsoft SQL Server. You need to recommend the
minimum number of site collections required for the farm. You must ensure that each content area can be
restored independently. How many site collections should you recommend?
A. 7
B. 5
C. 2
D. 1
Answer: B

Microsoft   70-668   certification 70-668   70-668   70-668   70-668 examen

NO.6 You have 10 SharePoint Server 2010 Web servers. All of the servers have the query component
installed. You need to ensure that search requests are distributed across all Web servers. What should
you implement?
A. Index partitioning
B. Content sources
C. A crawl rule
D. A crawler impact rule
Answer: A

Microsoft   certification 70-668   70-668 examen

NO.7 You are a SharePoint administrator for Proseware, Inc. The company policy and requirements are
described in the Exhibit (Click the Exhibit button).
You need to recommend a monitoring solution that meets the company's technical requirements. What
should you recommend?
Exhibit:
A. Web Analytics reports
B. Performance Point Services
C. Information management policy usage reports
D. Diagnostic logging
Answer: A

Microsoft   70-668   70-668 examen   certification 70-668   70-668

NO.8 You have a SharePoint Server 2010 server farm. The farm contains two Web servers. The load
between the two Web servers is distributed by using DNS round robin. You need to ensure that the farm is
available for all users if one of the Web servers fails. What should you do?
A. Configure alternate access mappings.
B. Implement Windows Network Load Balancing.
C. Configure netmask ordering.
D. Add a new Web server to the farm.
Answer: B

Microsoft   70-668 examen   70-668 examen   70-668

NO.9 You need to identify which factors must be considered when implementing site use confirmation and
automatic deletion. Which two factors should you identify? (Each correct answer presents part of the
solution. Choose two)
A. The site template used to create the site collection
B. The size of the documents stored in inactive sites
C. The number of days a site is inactive
D. How often to notify the site owners
Answer: CD

certification Microsoft   certification 70-668   70-668   70-668   certification 70-668

NO.10 You have a SharePoint Server 2010 server farm. Every night, you perform a full backup of the farm
and a backup of all the SharePoint databases. You are planning the recovery strategy for the Secure
Store Service.
You need to identify which information is required to recover the Secure Store Service. What should you
identify?
A. The Secure Store Service passphrase
B. The Secure Store Service application pool identity
C. The farm passphrase
D. The Central Administration application pool identity
Answer: A

Microsoft examen   70-668 examen   70-668 examen   70-668

NO.11 You plan to implement a SharePoint Server 2010 server farm. The farm will be used to store
documentsthat are as much as 100 MB. You need to recommend a search solution to meet the following
requirements:
-Provide security-trimmed search results.-Provide thumbnail previews of search results.-Provide the
ability to filter searches by using metadata.-Minimize costs.
What should you recommend?
A. Microsoft SQL Server Full-Text Search
B. Microsoft Search Server Express
C. Microsoft FAST Search Server
D. Microsoft SharePoint search server
Answer: C

Microsoft examen   certification 70-668   certification 70-668   70-668   70-668

NO.12 You have a perimeter network and an internal network. You plan to use SharePoint Server 2010 to host
the company's public Web site. You need to recommend a solution for the site that meets the following
requirements:
-Content data must be stored inside the internal network.
-The number of servers must be minimized.
What should you include in the solution?
A. Deploy a Web server in the perimeter network. Deploy an Active Directory Lightweight Directory
Services (AD LDS) server in the perimeter network. Deploy a Microsoft SQL Server in the perimeter
network.
B. Deploy a Web server in the perimeter network. Deploy an Active Directory Lightweight Directory
Services (AD LDS) server in the perimeter network. Deploy a Microsoft SQL Server in the internal
network.
C. Deploy a Web server in the perimeter network. Join the Web server to the internal Active Directory
domain. Deploy a Microsoft SQL Server in the internal network.
D. Deploy a Web server in the perimeter network. Create a new Active Directory domain in the perimeter
network. Deploy a Microsoft SQL Server in the internal network.
Answer: C

Microsoft   70-668   certification 70-668   70-668 examen

NO.13 You have a SharePoint Server 2010 server farm. You plan to implement My Sites. You need to
recommend a solution that prevents personal profile data from appearing in search results. What should
you recommend?
A. User Profile Services policies
B. Information management policies
C. Audiences
D. Access Services
Answer: A

Microsoft examen   70-668 examen   70-668   70-668 examen   70-668 examen

NO.14 You have a SharePoint Server 2010 server farm that contains 10 Web servers. You need to ensure that
the processing of SharePoint user solutions is evenly distributed across the servers in the farm.
What should you do in the server farm?
A. Implement Windows Network Load Balancing on all of the Web servers.
B. Start the Sandboxed Code Service on all of the Web servers.
C. Create a new Secure Store Service application.
D. Configure the Data Retrieval Service.
Answer: B

Microsoft   70-668 examen   certification 70-668   70-668

NO.15 You plan to implement SharePoint Server 2010 on your company's intranet. The company has a
custom application that contains the contact information of all users. You need to ensure that you can use
the contact information to create custom audiences. What should you implement?
A. The Managed Metadata Service and the User Profile Service
B. Business Connectivity Services and the User Profile Service
C. Business Connectivity Services and Access Services
D. Access Services and the User Profile Service
Answer: B

Microsoft examen   70-668 examen   70-668 examen   70-668

NO.16 You have a SharePoint Server 2010 server farm that contains two servers. You need to recommend a
solution to ensure that both servers have a complete copy of the index. What should you recommend?
A. Add a new query component
B. Add a new crawl database
C. Add a new crawl component
D. Add a mirror query component
Answer: D

Microsoft examen   certification 70-668   70-668

NO.17 You plan to deploy SharePoint Server 2010 and to enable self-service site creation. You need to
recommend a Web application configuration to meet the following requirements:
-Users must be allowed to create site collections.
-Site collections created by Web developers must be deleted manually.
-Site collections created by managers must be deleted automatically if they are not used for 120 days.
-Site collections created by other users must be deleted automatically if they are not used for 60 days.
-The number of site collections must be minimized.
What should you include in the recommendations?
A. Three Web applications that each contains one site collection
B. One Web application that contains three site collections
C. One Web application that contains one site collection and one Web application that contains two site
collections
D. One Web application and one site collection
Answer: A

certification Microsoft   70-668   70-668

NO.18 You have a SharePoint Server 2010 server farm that contains one Web server. The Web server has
only one IP address.
You plan to implement the following Web applications:
-http://portal.contoso.com
-http://intranet.contoso.com
-http://www.contoso.com
You need to recommend a solution to ensure that users can access all three Web applications. What
should you include in the solution.?
A. Host headers
B. Handler mappings
C. Extended zones
D. Alternate access mappings
Answer: A

certification Microsoft   certification 70-668   certification 70-668   certification 70-668

NO.19 You have a SharePoint Server 2010 server farm. The farm contains a single Web application. The
Web application contains 500 site collections. You need to recommend a solution to ensure that a user
can manage all of the site collections. You must achieve this goal while meeting the following
requirements:
-Ensure that the user cannot create Web applications.
-Use the minimum amount of administrative effort.
What should you recommend?
A. Add the user to the Farm Administrators group.
B. Modify the site collection administrators.
C. Define a policy for the Web application.
D. Configure a managed account.
Answer: C

certification Microsoft   70-668 examen   70-668   certification 70-668

NO.20 You plan to deploy a SharePoint Server 2010 server farm. The farm will contain three sites named
Sales, Corp, and Test. You plan to monitor the total storage used by each site. You need to recommend a
Web application and site collection configuration. The configuration must meet the following
requirements:
-Provide the ability to track the storage used by each specific site.
-Minimize the number of Web applications and site collections.
Which configuration should you recommend?
A. Three Web applications that each have one site collection
B. One Web application, one site collection, and three subsites
C. One Web application, one site collection, and two subsites
D. One Web application and three site collections
Answer: D

certification Microsoft   certification 70-668   70-668   70-668

Selon les feedbacks offerts par les candidats, c'est facile à réussir le test Microsoft 70-668 avec l'aide de la Q&A de Pass4Test qui est recherché particulièrement pour le test Certification Microsoft 70-668. C'est une bonne preuve que notre produit est bien effective. Le produit de Pass4Test peut vous aider à renforcer les connaissances demandées par le test Microsoft 70-668, vous aurez une meilleure préparation avec l'aide de Pass4Test.